Analýza konečných prvků (Finite Element) Jobs

Finite Element Analysis (FEA) is a procedure used to identify and solve engineering problems that can have a wide range of complexities. It’s a type of engineering simulation that uses a set of mathematical equations to analyze and solve various engineering problems. A Finite Element Analysis Engineer is the person who will interpret the results and make recommendations for the best engineering solution. In order for FEA to be performed correctly and accurately, professional engineers must use special software written for FEA purposes.

FEA works by breaking down complex architecture or components into smaller sections to simulate how the entire structure or object will behave under real life circumstances or scenarios. Through this method, FEA engineers are able to provide their clients with valuable insights about potential failures or defects that can be identified and corrected before it’s too late and expensive.

Here’s some projects that our expert Finite Element Analysis Engineer made real:

  • Soothed residual stress issues in a laminated structure casting
  • Optimized support structure in geometry models
  • Analyzed output data from 3 point bending tests
  • Calculated forces while studying fire tests with ASTM E119
  • Performed various hard complex analysis involving ANSYS models
  • Evaluated and calculated stress levels, deflection points, and vibrations in structures and components.

The analysis of complex architecture can be extremely time consuming, however through FEA simulations, engineers are capable of quickly identifying weak points and then immediately take action to optimize it. Clients who have access to experienced Finite Element Analysis Engineer can save time, money and energy while carrying out their projects because they know exactly how their structure behaves before it’s even built. That’s why we invite you to use Freelancer.com for your project so you can hire an expert engineer in FEA that can provide you with the best engineering solution for your needs.

Od 15,667 recenzí, klienti hodnotí našeho pracovníka Finite Element Analysis Engineers 4.82 z 5 hvězd.
Zaměstnat Finite Element Analysis Engineers

Filtrovat

Moje poslední hledání
Třídit podle:
Rozpočet
pro
pro
pro
Typ
Dovednosti
Jazyky
    Stav zakázky
    15 zakázek nalezeno, ceny v EUR

    I'm in need of an experienced mechanical engineer with expertise in Finite Element Analysis (FEA) to perform structural analysis on frames and plates made of metals. This is specifically on 3D Models of Material Handling Attachments such as pallet forks and lifting jibs etc. Lifting Attachments must be engineered and approved before proceeding into manufacturing. Key requirements and tasks: - Conducting in-depth structural analysis on metal frames and plates to ensure durability and safety in my design. - Using FEA software to simulate stress distribution, deformation, and other relevant factors. - Providing detailed reports on the analysis results, including insights and recommendations for potential design improvements. Ideal skills and experience for this project include: - Prof...

    €12 / hr (Avg Bid)
    €12 / hr Průměr. nabídka
    3 nabídky

    I'm in need of an expert who can help me evaluate the heat transfer performance of an HVAC system through thermal modeling and CFD simulation. Key Project Details: - The primary focus of this project is evaluating the heat transfer performance of an HVAC system. - The simulation should be able to provide insightful data on the system's heat transfer efficiency and possible areas of improvement. - Your expertise in thermal modeling and CFD simulation will be crucial to the success of this project. Skills/Experience Required: - Prior experience in conducting thermal modeling and CFD simulation, ideally within HVAC systems. - Proficiency in software tools such as ANSYS Fluent, SimScale, or Autodesk CFD is a plus, although not mandatory. - Understanding of heat transfer and its app...

    €1864 (Avg Bid)
    €1864 Průměr. nabídka
    25 nabídky

    I'm seeking an expert familiar with Abaqus and Fortran77 coding to develop specific subroutines for my project. Your tasks will include: 1. Material Subroutine: - Implement a subroutine considering the nonlinear behavior and anisotropic properties of materials. Your expertise in modeling complex material behaviors is needed. 2. User-Defined Output Subroutine: - Develop a user-defined output subroutine that can accurately extract and present nodal displacements and element stresses. The ideal freelancer should have extensive experience in using Abaqus software, in-depth knowledge of Fortran77, and a solid grasp of material science, as well as experience handling anisotropic and nonlinear materials. Accurate coding and performance under various testing conditions are crucial...

    €600 (Avg Bid)
    €600 Průměr. nabídka
    2 nabídky

    I am in need of a skilled professional who can perform a wobble broaching analysis for a specific rectangular object. The primary purpose of this task is to calculate the change in area and volume for this object. Key Requirements: - Expertise in wobble broaching analysis - Proficiency in calculating changes in area and volume - Experience with analyzing rectangular objects Your main task will be to assess the rectangular object and provide a detailed report on the changes in its area and volume. The analysis should be accurate and precise, providing insights that can inform our manufacturing processes and product quality going forward.

    €39 (Avg Bid)
    €39 Průměr. nabídka
    10 nabídky

    I'm in need of a highly efficient roll forging solution, specific to small components. This solution should aim to: - High-level product quality - Minimise material waste - Have FEA abilities Special features I am seeking in this solution include: - Real-time monitoring capabilities for instant tracking and oversight - Remote control functionality for convenience and efficiency - Automated adjustment settings to maintain optimal operation I am primarily dealing with small components. Hence, an ideal candidate for this project would be someone with prior experience and a deep understanding of developing solutions for small component roll forging. Knowledge of FEA is a must. Looking forward to a seamless cooperation that will deliver an exceptional output.

    €296 (Avg Bid)
    €296 Průměr. nabídka
    6 nabídky

    As a client, I'm seeking a COMSOL MULTIPHYSICS expert who can conduct an in-depth analysis on the heat transfer and airflow rates of a vehicle brake disk. The primary goal of this project is to evaluate the performance of two different materials - cast iron and carbon ceramic - under varying conditions. Key responsibilities include: - Analyzing the heat transfer rate of the brake disk made from both cast iron and carbon ceramic. - Investigating the airflow rate on the brake disk for these materials. - Comparing and presenting the results of the analysis, particularly focusing on the performance differences between the two materials. - Providing insights and recommendations on the preferred material based on the analysis conducted. Ideal skills and experience for this project includ...

    €400 (Avg Bid)
    €400 Průměr. nabídka
    21 nabídky

    Seeking a professional with expertise in Ansys electronic software, capable of conducting a detailed electromagnetic simulation. The project is centered on electromagnetic dampers, requiring an in-depth simulation and analysis to assess and refine our designs. - Handle electromechanic simulations - Evaluate and improve current dampers design You need to have prior experience with electromagnetic simulations, particularly within the scope of dampers. Knowledge in engineering projects involving similar systems will be highly beneficial.

    €22 / hr (Avg Bid)
    €22 / hr Průměr. nabídka
    12 nabídky

    I am looking for someone with an in-depth knowledge of Ansys Electronics software who can assist me in simulation modeling. The task at hand involves creating an electromagnetic simulation. Desired Skills and Experience: - Proficiency in Ansys Electronics - Strong experience in Simulation Modeling - Specialization in Electromagnetic Simulation Modeling The perfect freelancer for this project must have a practical understanding of how to use Ansys Electronics for simulation modeling, specifically in generating accurate and efficient electromagnetic simulations. Your demonstrated experience would be paramount for this assignment.

    €18 (Avg Bid)
    €18 Průměr. nabídka
    9 nabídky

    Am doing a project using a simple shell and tube heat exchanger design and I have a problem with Ansys fluent validation. I already drew the shell and tube heat exchanger, simple design. However, the problem is that am unable to get similar results as the actual value when it comes to pressure drop. for flow rate 1 am getting it correct, but mass flow rate 0.5 and 2 kg/s are different and far from the actual values for the pressure drop of the shell outlet. I need someone that can fix the issue achieve at least 6% or less error compared to the actual value.

    €71 (Avg Bid)
    €71 Průměr. nabídka
    11 nabídky

    Платформа персональних фінансів

    €10 / hr (Avg Bid)
    €10 / hr Průměr. nabídka
    9 nabídky

    I'm in need of an expert in ANSYS software to perform a range of structural and/or thermal analysis tasks that are essential for my product development. Key Requirements: - Experience in ANSYS: As my ideal freelancer, you should have a strong command of ANSYS software, with a proven track record of using it for structural and/or Thermal analysis. - Product Testing: You'll be required to perform a series of tests on the product design, including a drop test, pressure test, load test, load distribution and thermal distribution analysis. - Comprehensive Structural Analysis: The primary goal of the project is to conduct a thorough structural analysis. This includes identifying stress points, testing material durability, and simulating real-world conditions. Material knowledge: She...

    €7 / hr (Avg Bid)
    €7 / hr Průměr. nabídka
    16 nabídky

    I need an expert in Ansys Fluent who can complete a heat transfer simulation setup within a one-day deadline. The specifics of the assignment are: - simulation - Heat transfer simulation with a focus on conduction - Post-processing analysis Freelancers should have a background in Ansys Fluent software and should be experienced in dealing with heat transfer simulations, The ability to adhere to strict deadlines is also crucial. Please place your bid if my project matches your skills and experience.

    €22 (Avg Bid)
    €22 Průměr. nabídka
    18 nabídky

    I'm seeking a structural analysis expert proficient in Abaqus to help me analyze a metallic structure. The goal is to deliver a comprehensive report with stress maps and deformation plots. Key requirements: - Proficiency in Abaqus: You should be very experienced with this FEA software, as it is central to this project. - Structural Analysis: Your expertise in structural analysis will guide you when interpreting and reporting the results. - Metal Materials Experience: The structure under study primarily comprises metal materials, hence your experience in analyzing metals will be crucial. If you're a detail-oriented, experienced Abaqus user ready to deliver a comprehensive structural analysis of a metal structure, I'd love to hear from you.

    €74 (Avg Bid)
    €74 Průměr. nabídka
    11 nabídky

    I'm seeking an expert in Abaqus FEA to execute a structural analysis of a medium-sized structure. Key Responsibilities: - Conduct a profound and detailed structural analysis using Abaqus FEA - Quantify and interpret results, providing comprehensible findings Ideal Skills: - Excellent command of structural analysis utilizing Abaqus FEA - Experience working with medium-sized structures - Detail-oriented mindset to capture all structure properties and anticipate all potential challenges. Your bid should include an approximate timeline for the analysis along with relevant samples of past structural analysis projects. I look forward to working with a seasoned professional ready to deliver accurate and reliable results.

    €14 (Avg Bid)
    €14 Průměr. nabídka
    3 nabídky

    I have a small, simple project which requires the application of Finite Element Analysis (FEA) through Abaqus software. Specifically, static and frequency analysis simulations are needed. The model to be analyzed possesses elastic material properties, making it imperative for the hired freelancer to have a robust understanding and experience with such models. Efficiency and accuracy are key requirements in this project, as we'd like to get precise results from the simulation. Ideal Skills and Experience: - Proficiency in Abaqus FEA software - Understanding of static and frequency analyses - Experience working with elastic materials - Detail-oriented with emphasis on accuracy and precision.

    €104 (Avg Bid)
    €104 Průměr. nabídka
    20 nabídky

    Doporučené Články Jen pro Vás

    Get your product into the hands of test users and you'll walk away with valuable insights that could make the difference between success and failure.
    7 MIN READ
    A guide to hiring and working with freelance Photo Anywhere Expert
    15 MIN READ
    Learn how to hire and collaborate with a freelance Typeform Specialist to create impactful forms for your business.
    15 MIN READ