Design výrobků Jobs

I need engineered stamped drawings for a concrete pad that will be used to set fuel tanks. This is for a commercial project and must comply with safety regulations. Requirements: - The pad will support fuel tanks. - It must meet all relevant safety regulations. Ideal Skills & Experience: - Experience with commercial concrete pad design - Knowledge of safety regulations and compliance - Proficiency in creating engineered stamped drawings

I need a detailed CAD drawing for an educational wooden toy designed for toddlers aged 1-3 years. Requirements: - The toy should be safe and suitable for toddlers. - The design should be educational and engaging. - There will be a mixture of components and details of how they will be fixed will be needed - e.g. screw types and placements. Ideal Skills and Experience: - Proficiency in CAD software. - Experience in designing toys, especially for toddlers. - Knowledge of safety standards for children's toys.

I need a detailed CAD drawing for an educational wooden toy designed for toddlers aged 1-3 years. Requirements: - The toy should be safe and suitable for toddlers. - The design should be educational and engaging. - There will be a mixture of components and details of how they will be fixed will be needed - e.g. screw types and placements. Ideal Skills and Experience: - Proficiency in CAD software. - Experience in designing toys, especially for toddlers. - Knowledge of safety standards for children's toys.

I'm looking for a skilled SketchUp drafts person to create 10 to 15 fitted furniture sketches per week. The sketches will be used for client presentations and require moderate detail. Sketch up to Layout. Ideal skills and experience: - Proficiency in SketchUp - Experience with furniture sketching - Ability to create moderate-detail drawings - Reliable and can meet a regular deadline

Protect timeline 2 working days max Project max 100cdn have a working RF receiver board with stable firmware, but the companion transmitter board is unusable because the only Gerber and BOM I was sent are corrupted. The transmitter’s firmware binary is intact, so the new hardware must accept that code without modification and still communicate flawlessly with the existing receiver over our RF data-transmission link. What I can supply: • The corrupted Gerber and BOM as rough references • High-resolution photos of the original populated transmitter board • The receiver board’s schematic and dimensions • The compiled transmitter firmware (HEX) Your task is to recreate the complete transmitter design from the ground up—clean schematic, PCB layout,...

Smart Hot-Bar — CAD & Prototype Development I have the core concept for a compact smart commercial hot-bar and am looking for a skilled mechanical/mechatronics engineer or product designer who is interested in working with me long term to develop the project. I already have the main concept and functionality planned. I am looking for someone who can help turn the concept into a professional engineering design and eventually a working prototype. Phase 1 — 3D CAD & Technical Design Budget: $209 The first phase will focus on designing a small prototype version of the machine. I need help with: - Complete 3D CAD design - Internal mechanical/component layout - Technical drawings with dimensions - Exploded/assembly views - Component and material recommendations - Basic...

1. I’m Naila Khan, a professional Fashion & Jewellery Designer. 2. I specialize in jewellery designing and digital/manual jewellery illustration. 3. I’m looking for freelance jewellery design projects through Freelancer. 4. I’m interested in working with jewellery brands, stores, manufacturers, and individual clients. 5. Could you please guide me on how I can get relevant project requests and start working as a freelancer? Thank you for your support!

I’m gathering quotes to have 50 custom jigsaw puzzles produced—some with 50 pieces and some with 100 pieces. Key requirements • Material: Cardboard only. • Artwork: I already have print-ready designs for every puzzle; you will receive high-resolution files. No design work needed—just accurate color reproduction. • Piece size: A mix of small (≈1 inch) and medium (≈2 inch) pieces, depending on the puzzle variant. • Quantities: Total run of 50 finished puzzles. Please specify in your proposal how you would divide that across the 50-piece and 100-piece versions or suggest an efficient split. • Packaging: Individual boxes with the puzzle image on the lid preferred; include options for shrink-wrap or protective film. • Sh...

I'm looking for an experienced engineer to design an electric module that can push 1600 PSI of brake fluid for trailer disc brakes. The key requirement is ease of integration with existing systems. Essential aspects include: - Must operate at 1600 PSI - Designed for trailer disc brake systems - Easy to integrate with current systems Ideal candidates should have: - Experience in hydraulic and electric systems - Strong background in brake system design - Proven track record in industrial design and integration Please provide examples of similar work done.

Overview I'm developing a small consumer hardware product and need a talented, creative mechanical engineer to design the internal mechanism. The concept is a compact, hand-held device with an outer shell that the user twists. That twisting motion must drive an internal mechanism that raises a small output lever/arm approximately 90° and then returns it back to its original resting position — a single, smooth "raise-and-return" cycle per actuation. What you'll design A mechanism that converts rotary input (a twist about the central axis) into a controlled oscillating lift of a small output arm (up ~90°, then back to home). An outer shell / inner mechanism arrangement that self-locates and indexes repeatably onto a target surface each time it's place...

I need a full mechanical design package for an automatic PET bottle-blowing machine, from concept through to production-ready drawings. The priority area is the blowing unit itself, so every decision you make for the wider machine must integrate smoothly with that module. Blowing unit requirements • Material type: choose grades that can handle food-grade PET contact and repeated thermal cycling without fatigue. • Pressure capacity: the unit must safely sustain the high-pressure air bursts typical of 2-stage stretch blow moulding, designed with a generous safety factor. • Temperature resistance: components must tolerate the preform heating zone’s radiant heat as well as the sharp pressure-induced temperature drops during blowing. Scope of work – Complete...

Project Title: Design a Raspberry Pi HAT PCB for DSLR Camera Trigger - Altium Project Description: I need a small PCB designed that sits between a Raspberry Pi and a DSLR camera to trigger the shutter and focus. Requirements: - 3x Female GPIO Headers to mount directly on top of Raspberry Pi - 2x Optocouplers to separately trigger Camera Focus and Shutter - 2x Resistors for current limiting - 1x 2.5mm TRS Jack for camera connection - All components must be Through-Hole for easy home soldering. No SMD - All parts must be available from UK suppliers like RS Components or Farnell - PCB should be compact and designed as a Pi HAT Reference: Google "Corona designs Raspberry Pi DSLR camera trigger" - I want the same but with 2 optocouplers instead of 1 Deliverables: 1. Complete Alt...

Hi, I need a small PCB designed that can be used with a Raspberry Pi. It is designed to sit between a Raspberry Pi and a DSLR camera and trigger the camera's shutter. It would have the following components on it: - Three female headers so it can sit directly on top of the Pi - Two octocouplers - Two resistors - One single 2.5 mm TRS jack If you google "Corona designs Raspberry Pi DSLR camera trigger", that is basically the same thing as what I am trying to create. However their board only has one octocoupler on it and two pins from the Pi so it can only trigger the camera shutter. I want to include the two octocouplers so that the design can trigger the focus and the shutter separately for the camera. I want the circuit board to be relatively compact but d...

I need a compact paper holder that mounts securely on a wall and fits an industrial-style setting. The core goal is to develop a sheet-metal (powder-coated or stainless, whichever best supports the concept) solution that a metal shop can fabricate without guesswork. Scope and flow Milestone 1 – Concept (30 %) • Within 24 hours, present at least one concept sketch or simple 3D mock-up that shows form, mounting method, and basic dimensions. • One round of feedback is included; if the concept direction is off, we may end the project here. Milestone 2 – Final Design (30 %) • Refine the chosen concept into a fully resolved design: precise dimensions, fastener type, material gauge, and finish specification. • Supply rendered views so we can verify aest...

This project covers the complete technical development of a 250 mL premium cocktail pre-mix container in food-grade PET. I need a production-ready 3D CAD model that balances eye-catching shelf appeal with the practical demands of high-speed filling lines—good conveyor stability, reliable top-load performance, and smooth, repeatable handling by grippers. Key engineering points • Accurate volumetric and overflow calculations so the nominal 250 mL fill is achieved within standard tolerances. • Ergonomic form that feels secure in hand yet nests efficiently on pallets. • Closure design: I currently favour a screw cap but I am open to fresh ideas (foil seal or a custom neck finish) if you can demonstrate clear functional or branding benefits. • All geometry must ...

I have a CAD model for a slim button block that measures 290 mm × 75 mm × 17 mm and incorporates living hinges. Each button only needs 1 mm of travel yet must stand up to many presses, so durability with a little give is essential. Material & finish I’m leaning toward clear PP filament because it delivers the moderate flexibility these hinges demand while keeping the part optically translucent. If you believe a specific clear resin can meet the same mechanical targets just as well, let me know—performance comes first. Whichever route we take, the final parts should feel smooth to the touch; visible layer lines need to be kept to a minimum. Quantity & accuracy Two identical pieces are required. Please keep overall dimensions within typical hobby-grade t...

I need a talented designer to create a Japanese automotive-themed clothing line focused on drifting. This line will include T-shirts, hoodies, and caps. Key Requirements: - Designs centered on drifting, inspired by Japanese automotive culture. - Incorporate minimalistic, bold and colorful, and retro styles. Ideal Skills and Experience: - Experience in automotive-themed apparel design. - Strong understanding of Japanese drifting culture. - Ability to blend multiple design styles. Looking forward to your creative input!

Looking for a designer to help create a compatible design for a flow wrap film. Concepts are already created, will require changes to be made to the manufactures requests. Key requirements: - Design for food item (salad) - Use of copy concepts for inspiration Ideal skills and experience: - Proven design portfolio - Experience with food packaging design - Strong understanding of market trends - Creative and innovative mindset

I have a physical product in development and now need a clean, manufacture-ready 3D model. The file has to serve as the definitive prototype reference for tooling, so dimensional accuracy and watertight geometry are essential. I will supply sketches, reference photos, basic measurements, and functional notes; you turn that into a parametric CAD file (preferably STEP or IGES) along with a shaded render so I can visually confirm details before we lock the design for production. If you work in SolidWorks, Fusion 360, or similar professional software, just let me know—any mainstream, industry-standard package is fine as long as the output imports smoothly at the factory. When you respond, focus on the relevant product-prototype experience you’ve had: show me a couple of examp...

I have a small desk clock with a beautiful vintage edge-lit display, a bank of mechanical relays, and an Arduino doing the time-keeping. Unfortunately my first build was amateur—cold joints everywhere, wires stuffed into screw terminals, no strain relief.... Then a housemate dropped it. A friend at a makerspace has begun soldering bulbs in the propper layout to match the display but only completed the bulbs for 1 digit. They also started a ribbon connector for the bulbs to the relays/arduino/power section. I’d like you to finish the bulbs, get them connected, then cleanup the Arduino/gps-receiver/power section so it's mounted and ready for a case. I already 3d printed the display mount. • Flawless soldering on every connection, preferably on tidy perf-boards or a ...

I need a robust wheeled material trolley engineered for heavy loads above 200 kg. The trolley’s footprint must stay within 900 mm × 2000 mm, include integrated forklift pockets for safe lift-truck handling, and feature removable vertical posts with side guard rails so the deck can be cleared quickly when required. A rear push handle is also essential for occasional manual moves. Everything has to be fabricated in steel, so please select profiles and sheet gauges that balance strength with manageable weight up to 10T. I’m looking for a complete design package delivered as soon as possible: a 3D CAD model plus detailed fabrication drawings that a workshop can work from immediately, including weld symbols, hole sizes, and any hardware specifications. If you have past exper...

I need 3 headset spacers designs for a road bike. The headset spacer has to fit on top of the FSA headset cap and tapper in to be able to fit under the handlebar like the headset spacer on the pictures. It has to be abble to split like the headset spacer for the handlebar and i need 3 headset spacers, one with 7mm, 10mm and 14mm Requirements: - Material: Plastic or carbon if possible - Dimensions: 1.125 inches (1 1/8 inch) - Ideal skills and experience: - Experience with bike components - Ability to work with specified materials and dimensions

I'm looking for a skilled mechanical CAD designer to create a fully functional prototype of our "Flip-to-Fresh" modular razor. The design should be done in Fusion 360. Key components to be designed: - Handle - Blade cartridge - Storage case Ideal skills and experience: - Proficiency in Fusion 360 - Experience in designing detailed mechanical components - Ability to produce fully functional prototype models 1. Project Overview I am developing a premium, mechanical safety razor targeted at men with heavy, multi-day beard growth. The design focuses on "honest" engineering: a heavy, solid-metal handle and a novel "flip-to-fresh" dual-sided pivoting head that eliminates clogging and plastic waste. I require an experienced mechanical CAD designer to produce ...

I'm seeking an experienced CNC programmer to work with Mozaik software or V carve on a router machine. The material will be HDF. Key Requirements: - Expertise in CNC programming, specifically with routers making raised panels doors - Proficiency in Mozaik software - Experience working with HDF Ideal Skills: - Detail-oriented and able to produce precise, high-quality designs - Strong problem-solving skills - Previous experience in a similar project Please provide samples of previous work and relevant experience.

looking for 3d model designer for my pj who can convert product in image to 3d file stl I need an experienced **3D CAD/STL designer** to convert the attached temple reference into a **production-ready 3D model and STL**. The model must: * Closely match the reference design and proportions. * Have **strong, smooth cylindrical/tapered pillars** suitable for manufacturing. * Include a **concealed LED cavity inside the dome** with realistic light placement. * Include a **hidden wire channel through the hollow pillar → base**. * Include a **backlit ॐ (Om) with a real internal LED cavity**. * Have a concealed space in the base for the LED driver/wiring. * Be designed specifically for **silicone molding and resin casting**: no fragile details, microscopic gaps, difficult undercuts, or si...

I’m looking for a maker who can take my concept for a foldable laptop stand and turn it into a finished product. I want it produced in PLA plastic—lightweight, strong enough for daily use, and a greener choice than many other polymers. The design needs to fold flat for easy packing, then open to a comfortable typing and viewing angle. I have rough sketches and target dimensions, but I’ll rely on you for the detailed CAD work, material thickness recommendations, and any tweaks needed for durability. Once the digital model is approved, I’ll need a working prototype to confirm fit and stability. Deliverables: • CAD files • One functional PLA prototype (foldable)

I’m refreshing the visual identity of NORDIQ Technology and need a standout logo that instantly communicates our Nordic roots and our expertise in offshore, energy and marine technology. The company brings together specialist capabilities within engineering, product development, fabrication, machining, hydraulics, electrical systems, assembly and testing. The brand should communicate Norwegian technology developed for demanding environments: innovative, reliable, efficient, precise and trusted. Logo direction NORDIQ must be the dominant element, written in uppercase. TECHNOLOGY should appear underneath in a smaller, understated style. Modern, clean and technically sophisticated. Strong enough for the offshore and heavy-industry market, but not look like a traditional fabrication/w...

Photorealistic 3D render of a textile wearable device — stills + exploded view + turntable We're a Swiss hardware startup preparing the launch website for an unreleased product. We need launch-quality 3D renders before the physical unit exists. The project is under NDA — full specifications, dimensions, and reference material are shared after selection and signature. What we can say now: the product is a slim, loop-shaped elastic textile strap in matte-black technical fabric, with integrated flexible electrode zones on the inner face and a low-profile padded electronics module on the outer face. Design language: minimal, premium, precise — comparable to a flagship fitness wearable. No branding or text needs to be modeled. Deliverables: 1. Assembled product —...

I’m developing a fresh line of casual leather shoes aimed at both men and women and need a creative footwear designer who is already in the Delhi-NCR region so we can iterate together quickly in person when required. The core brief is to translate my brand mood board into a cohesive range of relaxed yet premium silhouettes that feel distinctly urban-Indian while still looking at home on international shelves. Here’s what I’d like you to handle from day one: • Concept exploration and hand/Adobe Illustrator sketching for loafers, sneakers and slip-ons • Material and colour selection focused on high-grade bovine leather available locally • Tech-pack creation with accurate specs, last references, component breakdowns and finish notes • Coordination...

I’m ready to take a capacitive fingerprint module from idea to full-scale production here in India and need an end-to-end technical partner to make it happen. Stage & scope I want to jump straight to mass production, but before the lines start running we still have to complete the product design itself. Once the design locks in, I’ll need immediate support on three critical fronts: • Sourcing materials – a cost-effective, reliable BOM with India-friendly suppliers for sensor dies, ASIC, FPC, encapsulation resin, flex PCB, and packaging. • Setting up manufacturing processes – line layout, equipment selection (pick-and-place, wire-bond, reflow, conformal coating, laser cutting for cover glass, etc.), process flow documents, and operator work-instr...

I need an exoskeleton prototype designed to protect prescription glasses during football. I have an AI Generated image of this but i require this to be modelled and ready for 3D printing. This exoskeleton should be lightweight, durable, and flexible. Requirements: - Material: Composite - Key Features: Lightweight, Durability, Flexibility - Attachment Method: Open to suggestions (clips, wraparound design, elastic bands) Ideal Skills & Experience: - Experience in prototyping with composite materials - Background in wearable technology design - Knowledge of structural integrity and flexibility in sports equipment

I’m wrestling with a design-related challenge that I can’t describe publicly yet. Once we have an NDA in place, I’ll share full context, sketches, and any existing files so you can dive straight into root-cause analysis and propose a clear, workable fix. I need someone who thrives on untangling design problems, whether that means re-thinking layout, refining user flow, or re-engineering a visual component for better usability and aesthetics. Proficiency with industry-standard tools—think Figma, Sketch, Adobe CC, or equivalent CAD/software if the solution leans more toward product design—will be critical because I’ll be expecting editable source files alongside your recommendations. Deliverables I’ll use to sign off the project: • Signed ...

I'm looking for custom battery holders to attach to a mountain and road bike frames. The holders should be made of plastic and is capable of supporting a small portable battery. The specific capacity isn't determined yet, so flexibility in design is key. On the mountain bike, it would be mounting on the back side of the seat tube down close to the derailer. See bike image attached. On the road bike, it would be mounting on the down tube below where the bottle cage attaches. See bike image attached. Please include estimated design AND 3D printing of the items. (not just the design pricing only). I can provide dimensions & up-close pictures of the areas referenced. Currently have some up close pics for the road bike and battery with rough-ish measurements. I use the same ...

# Compact 12S BMS / Active Balancing Board — Ready-Made or PCB Design We are developing a **12S drone battery system** We are looking for someone who already has a **compact 12S BMS design or board** suitable for a high-performance drone application. ### Required specifications * **12S Li-ion / LiPo** * Target PCB size: **maximum 50 × 60 mm** * **Active cell balancing** required * Individual monitoring of all 12 cells * Over-charge / cell over-voltage protection * Over-discharge / cell under-voltage protection * Over-current protection * Short-circuit protection * Over-temperature / under-temperature protection * Individual cell voltage monitoring * Pack voltage and current monitoring * **CAN / CAN-FD communication** * SOC monitoring * Battery fault/status reporting * Comp...

ABOUT THE PRODUCTS This name tag must work on TWO headphone models. Both are ours. 1. EduFlex - OVER-ear. Dark grey Bio EVA body, large coloured ear cushions. 2. KidsCover Safe 'n Sound - ON-ear. The body itself is aqua or lime, with small dark grey ear pads. Look at both. They are NOT the same shape and their headbands are not the same size. Reference photos of both are attached. We make extremely durable headphones for schools. They are sold in 6-packs and used daily by children in primary education, as shared class sets stored on wall racks or trolleys. This is why we need a name tag: a set of identical headphones must be matched to pupils, classes or device numbers. These are NOT toys. They are professional audio products for educational use in primary education. The d...

I am looking for an experienced Mechanical / Mechatronics / Product Development Engineer to perform an independent engineering feasibility audit of a compact device that combines controlled low-temperature drying and subsequent fine grinding of tablets or similar safe test materials. This is not simply a CAD, rendering, or industrial-design project. I already have several preliminary concept designs, but I do not want an engineer to simply convert them into CAD or confirm that they “look possible.” I need someone who can critically evaluate the physics, mechanics, airflow, heating, grinding, powder handling, cleanability, safety, manufacturability, and cost. If my current concept is too complicated, expensive, unreliable, difficult to clean, or mechanically incorrect, I wan...

I am preparing to launch a commercially-sold white phenyl line and need an experienced formulator who can give me a proven concentrate that dilutes at roughly 1 litre to 50 litres without losing clarity, stability, or cleaning power. My goals • Deliver a concentrate that remains homogenous, non-separating, and crystal white when customers dilute it. • Achieve a pleasant, market-ready fragrance profile while keeping raw-material costs competitive. • Comply with common commercial-grade disinfectant benchmarks and local labeling rules so the product is retail-ready. What I expect from you • A complete formulation with ingredient names, purities, and exact percentages. • Step-by-step manufacturing instructions: order of addition, agitation speeds, temperatu...

I’m refreshing my brand and need a designer who can create a full set of modern-style branding materials. Clean lines, balanced white space, and a forward-thinking colour palette are key. I already have the business name registered; what I lack is the cohesive visual system that will represent it everywhere—online, in print, and on social media. Here’s what I’d like handed over: • Primary logo and simplified secondary mark • Colour palette with HEX, RGB, and CMYK values • Font selections and hierarchy guidelines • Business card and letterhead layouts ready for print (PDF + source) • Social media profile/cover templates sized for the main platforms Everything should be built as vector artwork (Adobe Illustrator preferred) so it sca...

I’m preparing the next growth phase for my company and have decided to concentrate resources on product development—specifically the design and prototyping stage of a new offering that’s now at concept level. I need a clear, actionable plan that tells me exactly how to move from sketches and rough ideas to a validated prototype we can present to investors and early customers. What I’m looking for • A concise roadmap that breaks the design-to-prototype journey into realistic milestones, including recommended tools or platforms (e.g., SolidWorks, Figma, 3D printing services) and the typical timelines and costs attached to each step. • Guidance on material choices, manufacturability considerations, and how to structure an iteration loop for user feedback...

Please noted that - 700USD fix price are both jet I will supply high-resolution reference photos, sectional drawings, and verified dimensions for the HAL Tejas and Dassault Rafale. Your task is to translate that data into two separate, highly accurate 3D files that a tooling shop can drop straight into mold machining or a printer can slice without cleanup. Focus areas The cockpit, engine assemblies, and landing gear must carry the finest level of surface and component detail; every panel line, actuator, and intake contour needs to read cleanly at scale. Secondary surfaces such as wings and fuselage still have to meet aero-profile tolerances but can be kept to a more uniform topology as long as they remain watertight. Technical expectations • Output format: single, watertight S...

I have a mature consumer product that sells steadily but doesn’t stand up to real-world abuse as well as it should. My goal is to rethink the mechanical design so the next production run is markedly tougher without driving unit cost through the roof. Here is what I need from you: an industrial mechanical designer with at least 7–8 years on the shop-floor side of things—someone who instinctively balances DFMA principles with practical drafting skills. You will start by reviewing the current CAD set and recent failure data, then propose design changes that extend service life, reinforce high-stress areas, and simplify assembly where possible. Key expectations • Dive into the existing 3D model (SolidWorks, Creo, or comparable) and identify weak points through FEA or...

I am converting a small city car to full electric power and need the complete motor-to-wheel package laid out in SolidWorks. The core focus is the motor and drivetrain, so every model, mount and shaft you create should revolve around a single high-torque brushless DC motor. Scope • Position the motor, gearbox (if required) and final drive within a very tight engine bay while preserving existing suspension pick-up points. • Design custom motor mounts, couplings and adaptor plates that can be fabricated from aluminium or mild steel plate. • Specify reduction ratios and gear arrangement that deliver strong launch torque yet allow 110 km/h cruise without over-revving the motor. • Route half-shafts and CV joints, checking angles and plunge travel against current sus...

I need a complete electric-motor design tailored for heavy-duty industrial machinery where sustained, high torque is the overriding requirement. The project covers the full engineering cycle—from concept sketches and electromagnetic calculations right through to detailed 3D CAD models, winding data, thermal analysis and a bill of materials ready for prototyping. Key objectives • Deliver continuous high torque at typical industrial supply voltages • Maintain reliability in harsh, high-duty-cycle environments • Meet common efficiency standards—compactness and energy savings are welcome bonuses, but raw torque matters most Your package should include: 1. Electromagnetic design files (Maxwell, Motor-CAD or equivalent) with clear performance plots 2. Mecha...

I’m looking for an experienced beauty/cosmetics packaging and product designer to rebrand and modernize the existing design of my hair oil. The product itself is already fully established: - Bottle, glass, packaging format and dimensions are already fixed - All product texts and information are already available - I will provide the current product and packaging design as a reference I am specifically looking for a complete visual redesign/rebranding of the existing product. The project includes: - New product/label design for the existing bottle - New outer packaging/box design - Modernization of the overall visual identity - Typography, colors, layout and graphic elements - Premium and modern beauty/haircare look - Cohesive design between the bottle and outer packaging - Print-r...

**Need Help Dialing In 100W MOPA Fiber Laser Settings for Metal Cards** I’m looking for someone who has real experience with **100W MOPA fiber lasers and LightBurn**, specifically engraving metal bank cards. I already have my laser running and engraving, but I need help finding the **best settings for each card finish** so I can get a consistent, dark black engraving without damaging the card. These are the finishes I need settings for: **Matte** * Matte White * Matte Black * Matte Gold * Matte Silver * Matte Black Brass * Matte Green * Matte Red * Matte Pink * Matte Blue **Brushed** * Brush Gold * Brush Silver * Brush Rose Gold * Brush Red * Brush Blue * Brush Black * Brush Green * Brush Purple * Brush Rainbow I want to dial in the correct **speed, power, frequency, Q-pulse/...

I need a medium-sized, rectangular drainage pan made of plastic. The size should be similar to 18x24 inches. Ideal skills and experience: - Experience in manufacturing plastic products - Ability to create custom shapes and sizes within specified dimensions - Knowledge of durability and suitability of materials for drainage purposes

Odor control unit designer based on activated carbon. GRP Vessels designer, HSE, prior experience in similar jobs. minmum 5 years. model revising and create open source data for the company, O&m, p&id, electrical and control drawing preparing. Drawings in cad.

Looking for an Industrial Designer / Product Designer – Consumer Electronics We are developing INkey, a new productivity-focused Android smartphone with a physical QWERTY keyboard. We are looking for an experienced designer who can take our existing product concept and develop the industrial design and detailed CAD for a physical prototype. The freelancer must provide the original CAD files upon completion (must for release for final Payment).

Job Title: Experienced Hardware Engineer – Custom Embedded Linux IoT/Controller Hardware (Prototype) We are looking for an experienced Hardware & PCB Engineer to design a prototype expansion module/accessory for an interactive game controller environment. The device will be a high-performance, ultra-low-power embedded board featuring wireless connectivity (Bluetooth & Wi-Fi) and a 6-axis Accelerometer/Gyroscope (IMU) motion-tracking sensor suite. The target architecture is based on an Embedded Linux platform (ARM/SoC/SoM) with a heavy engineering focus on battery power optimization and custom power management circuits. Your main responsibility will be board-level schematic design, multi-layer PCB layout, component selection, and preparing production-ready manufacturing files ...

I’m preparing an aftermarket front-bumper line for current-generation Silverado and RAM pickups and need an engineer who has already worked on these platforms to turn my rough sketches into production-ready designs. Your job is two-fold. First, shape the exterior so the finished piece really elevates the truck’s look—aggressive lines, tight body gaps, and a factory-quality fit are critical. At the same time, the internal structure must meet OEM mounting points and basic impact requirements, so your CAD models have to balance style with sound engineering. Key deliverables • Fully parametric 3D CAD files (SolidWorks or Inventor preferred) • Exploded assemblies with mounting hardware and part numbers • Material call-outs suitable for mid-volume steel ...