Pozemní stavitelství Jobs

I want someone to do Structural load calculations ,Critical stress calculations and Failure analysis for my design

Hardwood Flooring Installation in Living Room I am looking for a skilled professional to install solid wood flooring in my living room, which is approximately 1000 sq ft. The ideal candidate should have experience in hardwood flooring installation and must be able to provide references. Skills/Experience: - Experience in hardwood flooring installation - Ability to work with solid wood flooring materials - Excellent attention to detail - Good communication skills - Ability to work efficiently and complete the project on time Please provide a detailed quote for the project, including the cost of materials and labor. Thank you.

I am looking for a freelancer to design and create shop drawings for a residential building in the construction phase. The ideal candidate should have experience in designing and creating shop drawings for concrete structures. Skills needed: - Experience in designing and creating shop drawings for concrete structures - Knowledge of building codes and regulations for residential buildings Experience required: - Experience in designing and creating shop drawings for residential buildings - Experience in working with concrete materials Materials needed: - Concrete Please provide examples of previous work you have done and your availability for the project.

Structural Load Schedule and Design for Small-scale Project

I need a project for a master bedroom addition to my existing house.

Looking for a skilled individual to create a Primavera plan for a construction project with 50-100 activities. The project has strict deadlines that must be met. Ideal candidates will have experience in construction project management and proficiency in Primavera software. Attention to detail and strong communication skills are also necessary. The project is only structural works with five basements and 26 floors. The basements will be divided into two parts with one part up to ground floor and the other contains the building with 26 floors. Works start from plain concrete , waterproofing then reinforced concrete work

Project details - remove single story comp roof and replace with walk-on deck. I need provide city of Huntingtn Beach with engineer stamped structural plans.

I am seeking a structural engineer or architect who can provide a calculation for the foundation of two steel tanks, a total weighing 70 tonnes. The project is for our existing business and will be located outdoors. The ideal candidate will have experience in structural design and knowledge of steel materials. The project will require the following: - Calculation for the foundation of two tanks - Analysis of soil conditions - Design of reinforced concrete foundation - Knowledge of steel materials and their properties - Ability to adhere to safety regulations and standards. - AutoCAD desing and experience

I am doing a home remodel changing a bedroom and bathroom to a living room and kitchen (granny suite) and adding a bedroom and bathroom to the garage. I need blueprints to use to pull my permits as honeowner contractor. Granite Falls, NC (Hickory area).

Hi i am looking for someone who has experience in takeoffs for painting projects and can read plans of houses, buildings and other contruction in australia. Some who is an estimator. Possibly ongoing project reading, estimating areas needing painting, preparing excel sheets. Probably 10 projects a month.

I am looking for a freelancer who can help me with a quantity estimate for a forth comming project. The project requires someone with past work experience in quantity estimation for Steel works. The project needs to be completed ASAP, so the ideal freelancer would have the availability to start right away. Skills and experience needed: - Past work experience in quantity estimation for businesses - Ability to work under tight deadlines - Strong attention to detail - Good communication skills to discuss project requirements and progress updates - Knowledge of relevant software/tools for quantity estimation If you have the required skills and experience, please include your past work in your application. Thank you!

I need a mechanical engineer to carry out engineering on attached project at 4 - 6 Eastwood st -- to satisfy Victorian standards for building permit and use for heating and cooling on job. I need the plans drawn and stamped

Staying within permitted development (going 3m back) and with a very simple design, I am looking for a structural engineer to survey and provide drawings for my builder to commence the project. Many thanks.

I have a partially completed patio that now needs a permit. The plot map, framing, and elevation drawings are done. Need to complete floor plan, Constuction section, foundation, structural details and plan.

Structural design needed for top slab's shuttering and scaffolding using plywood material and scaffolding material. The top slab is 10 m x 5 m and requires a medium load-bearing capacity. Ideal skills and experience for the job include expertise in structural engineering and experience with wood material for construction.

There is one story edification over a bridge. Pillars are the concrete and the beams are the steel. I need someone who knows CSI Bridge. We will work together in this project

My project requires the expertise of a civil engineer who has experience with designing and constructing large and complex structures using steel. This project will demand great attention to detail, with a focus on accuracy and quality workmanship. The engineer should have significant experience in structural design, utilizing steel as the primary material. Additionally, experience in site development and transportation engineering means the optimal person for the job will have a range of skills in order to ensure the project is completed successfully and efficiently. Overall, this is a large and complex project, with specifications that require the precision of an experienced civil engineer.

Event center just under 13,000 square feet. Stair case should be CENTERED I also want a loft upstairs for people to sit and relax and an office upstairs 3D rendering is a must

need civil for foundation plan/boq of simple porch 25x20 feet

I am looking for an experienced and knowledgeable freelancer to do a vehicle load analysis on a specific structure using SAP2000. The analysis will consider static loads and is for structural design purposes. I will supply the overall dimensions, material data, vehicle and design code data so that the freelancer can do the appropriate analysis. The final deliverable of this project should be a report explaining the results of the analysis and methods used. Experience with SAP2000 is highly preferred for this project.

I'm looking for a qualified structural engineer to design and drawing a navigation tower of between 30M. The design should adhere to the TIA-222-G standards, and the tower should be able to withstand wind speeds ranging from 162 Kmph. Given the important nature of this tower, the engineer should be Experienced in structural design and well-versed in the applicable engineering principles. I expect the engineer to work closely with me throughout the entire process, providing updates, responding to questions, and making any necessary adjustments that are required. No major surprises should be expected at the end of the project. Thank you for your interest in this job. BASE WIDTH -2.5M TOP WIDTH - 0.75M Exposure - D WIND - 162KMPH HEIGHT-30M 3 LEGGED ANGLE TOWER WITH SEISMIC LOAD PROJEC...

I need the help of a Mechanical or Structural engineer who can help me with stress analysis of a Piping system and Generate Detailed reports using CAESAR II quite urgently, if you have the skills, kindly reach out to me

I am purchasing a steel shop building from my manufacture in China. I am looking to get engineer plans, stamped by a licensed engineer in Ohio for permitting purposes.

I am not skilled in cad but i do much design work. The previous engineer i was working with has been rather disappointing. It has seem to hit a wall and there were some big mistakes. I need to verify some calculations and detail concepts to put on the drawing so i can obtain stamps and seals. Footer Detail CMU Column Detail Wall Section Detail Truss Detail Wood floor framing detail Uplift connector detail Cantilever detail Foundation Plan Truss Plan Floor Framing Plan Roof Framing plan Elevation Views Specs with data and calculations Foundation specs with calculations and factory of safety Truss calculations The structure is 24x56 and i have some cad and revit models. Just need to conclude it. If you have availability i will send you what I have, you can let me know if you can h...

I am in need of a Structural Designer with Precast Experience in USA projects to design parking garages for my upcoming project. The ideal candidate should have experience in designing precast parking garages. Design Codes and Regulations: I will provide specific design codes and regulations to follow for the project. Project Timeline: The project timeline is more than 4 weeks. Skills and Experience: Ideal skills and experience for this job include: - Experience in designing precast parking garages - Knowledge of specific design codes and regulations - Ability to work on a project with a timeline of more than 4 weeks.

I have a blueprints for residential house and need to size the steel beam. Please let me know if you provide this service. If you do, what is cost.

I am looking for a freelancer who can check my SAP2000 model for non linear time history analysis. I have previously conducted this analysis on the model and require software version 2022 for the analysis. The ideal candidate should have expertise in SAP2000 and experience in conducting non linear time history analysis. I am not getting proper hinges in beams and columns for time history hinges in my beam element does not cross IO state for any earthquake hinges are failing in column but the beams are still lying within IO. Specific Requirements: - SAP2000 software version (to be disclosed to the chosen freelancer) - Experience in conducting non linear time history analysis on SAP2000 model

I'm looking to hire a qualified Structural Engineer to design a medium-sized project. The structure I am looking to create could involve residential and commercial projects. Although I may have a rough idea in mind, I am open to new ideas and concepts suggested by the engineer. The engineer should have the necessary experience, have a solid background, and have access to the right resources to complete this project according to my specifications. In addition, the engineer should understand the local and/or state requirements for engineering and be able to provide a permit as needed. This structural engineer will be required to deliver a completed design that meets my needs and provides a cost-effective and safe structure.

New home build on snow zone hillside with upward facing western views of mountain range. ~4000sf. not including garage. pacific nw style. 1 main story with finished daylight basement. 3 bdrm, 3+ bath, great room, den, chefs kitchen, dining, breakfast, office, spa, laundry, mudroom, wine storage room and mechanical/storage room in basement. Fireplace in great rooom and primary bedroom, large deck--partially covered. Would like to maximize mountain views. 3-4 car garage can be in basement. No steps front door/entrance. Prefer a budget friendly design. Floor plan, 3D renderings and CAD file a must.

I am looking for an experienced, certified civil engineer to install a septic tank for a franchise restaurant. The size of the property where the septic tank will be installed is less than 3 acres, and there is no existing septic system that needs to be removed. An estimated number of more than 10 people will be using the septic tank at any given time. The ideal engineer will have a firm understanding of local regulations and building codes, as well as associated safety risks. It is also preferred that the engineer have knowledge of commercial and residential building permit processes.

I need premanufactured building plans reviewed and stamped by an Architectural Engineer

I need the Expertise of A CIvil/Structural Engineer with skills and deep knowledge of working on drainage ..The drainage study should show the existing exit velocity of water prior to construction and exit velocity after construction. A mitigation measure to reduce to the original exit velocity is needed in correspondence to the city codes.

I need an Urgent service of a Structural/Architectural Engineer who can help me quickly work on to get some elevation plans, Truss plans, details, and Load Calculations on my project, i need this urgently, your help would be appreciated, Thanks