Ukončen

PLC Based Control System.

See the attached file for more details

Motivation:

This project is motivated by the need for an automated safety system for the steam generating unit of a company. This system is required in the company following an accident that occurred in the company due to a miss communication between the maintenance and operation teams that resulted in collapse of a tank. A safety relief valve used to maintain pressure inside the tank was removed during maintenance and the operation team resumed operation before the valve was restored leading to a vacuum in the tank that leads to the collapse of the tank. By having a system to automatically monitor pressure inside the tank and alert the operation team in case of pressure imbalance, such accidents can be minimized considerably. In all industries, equipment such as motors, pumps, belts, gear trains and couplers are subject to wear and tear during use that would eventually result in an unscheduled shutdown. Cavitation one of the areas of interest of this research results in deterioration of the performance of pumps that may lead to failure of the pump. These unscheduled shutdowns lead to idle personnel and equipment that are usually expensive to maintain. By early detection of cavitation, these maintenance costs can be avoided. The motivation for this

project, therefore, is to design a cost-effective, efficient system that automatically diagnoses pumps for degradation and cavitation to be able to predict pump failure thus decrease the large costs associated with idle equipment and personnel due to unscheduled shutdowns.

Objectives:

The main objective of this project is to develop a simulation of a system that would improve safety in a steam production unit by use of sensors interfaced to a controller which controls actuators such as valves and an alarm. This main objective would be based on an accident that happened in a steam production unit of the company. Another major objective is to design a system for automatically monitoring cavitation in a water pump. To achieve these objectives, research must be done on the safety measures that are currently used in a steam production plant of a chemical products company, possible areas and areas disposed to accidents should be identified, causes, effects and ways of detecting cavitation have to be investigated then

systems designed to improve safety of the steam production unit and to monitor cavitation.

Dovednosti: Elektrotechnika, Elektronika, Inženýrství, Strojní inženýrství, PLC a SCADA

Zobrazit více: types of plc, plc programming languages, plc definition, plc programming ladder logic, plc programming, plc applications, plc basics, plc controller, excel based stock control system, microcontroller based vehicle speed control system, microcontroller based vehicle control system, excel macro based inventory control system, msc dissertation role based access control system, excel based inventory control system, generator control system plc, observer based control design tank system, develop vdm specification access control system, develop web based pos system, gsm based vehicle control system technical feasibility, microcontroller based face recognition access control system

O zaměstnavateli:
( 0 recenzí ) Joondalup, Australia

Identifikační číslo projektu: #16711552

17 freelanceů na tento projekt zveřejnilo nabídku v průměrné hodnotě $236

MIKY4227

Senior ENGINEER has more of 40 years’ experience in this profession, developing Hardware and Software Expertise in video processing and associated simulation and evaluation tools and methods, communication I2C, I2S, SA Další

$277 AUD za 10 dní
(40 Recenzí)
6.1
urbito

Hello there! Hope you doing good! If you still need this to be done, be sure to contact me. Lets make something awesome! Greetings!

$250 AUD za 45 dní
(28 Recenzí)
5.2
mzlst50

Hi, this Dr. Y E an expert inPLC/HMI/SCADA and phd researcher. please navigate my profile to see the completed projects, Skills, and my client reviews. regards

$155 AUD za 3 dní
(16 Recenzí)
4.3
zeshankhan43210

Dear Sir, I have read your requirements and objectives. Please specify platform/software for simulation purposes. Contact me and discuss the project.

$777 AUD za 10 dní
(14 Recenzí)
4.8
$250 AUD za 5 dní
(1 recenze)
3.0
$155 AUD za 3 dní
(4 Recenzí)
3.1
samiahmetjunaid

I am a Veteran Mechanical engineer. I had a fast overall look to the project. Let me know If you are interested. Work will be done just PERFECTLY.

$400 AUD za 10 dní
(1 recenze)
2.4
hidayat88

Hi, based on the requirement, you need a simulation of SCADA software. Luckily I also done not only pump sequencing, but also AI Chiller Management System. I will come out with a proposal with the best solutions for th Další

$210 AUD za 3 dní
(0 Recenzí)
0.0
innocentsafari

i have previously designed systems using PLC, and some of the systems were: 1. Level monitoring for two tanks. Clean dirty oil and pump it into a clean tank. 2. Crane Load Management: Here I used a PLC to monito Další

$155 AUD za 3 dní
(0 Recenzí)
0.0
pejmanbadri

I've a solid background on industrial automation and process, various architecture: PLC, SCADA/HMI and DCS based on Siemens, Allen Bradley and Schneider Electric platforms. Also I have strong knowledge on AutoCAD Elec Další

$333 AUD za 10 dní
(0 Recenzí)
0.0
Pjain58

i have worked in processing olants and have good knowledge of the systems it will easier for me to write the code.

$177 AUD za 10 dní
(0 Recenzí)
0.0
pankajpal56

A proposal has not yet been provided

$222 AUD za 30 dní
(0 Recenzí)
1.4
$222 AUD za 10 dní
(0 Recenzí)
0.0
eslamkelash

A proposal has not yet been provided

$100 AUD za 3 dní
(0 Recenzí)
0.0
$155 AUD za 3 dní
(1 recenze)
0.0
pitter94

A proposal has not yet been provided

$111 AUD za 10 dní
(0 Recenzí)
0.0
luthfi24

i will simulate using Proteus to see how it works. I can send you the final simulation then you can implement it using Arduino or PLC.

$55 AUD za 2 dní
(0 Recenzí)
0.0