Find Jobs
Hire Freelancers

Spray Nozzle Analysis

£250-750 GBP

Probíhající
Zveřejněno skoro před 6 roky

£250-750 GBP

Zaplaceno při doručení
I have developed a Spray Nozzle and need some analysis work doing to determine flow characteristics inside the swirler element, determine flow and whatever else we can do. I have an existing design to carry out the work on first and prove the findings, the new design will then be compared against this. It won't let me put it under the skills but you will need ANSYS or some other CFD Analysis software
IČ projektu: 17163897

O projektu

37 nabídky
Vzdálený projekt
Aktivní před 5 roky

Chcete si vydělat nějaké peníze?

Výhody podávání nabídek na Freelancer

Stanovte si rozpočet a časový rámec
Získejte za svou práci zaplaceno
Načrtněte svůj návrh
Registrace a podávání nabídek je zdarma
Uděleno:
Avatar uživatele
Hi, I just finished a project involving the injection of water and methanol droplets into a jet engine, which is vaguely related to this, and I also did a simulation of a jet engine combustor that features a swirler. So I'd be excited to simulate your project accurately in ANSYS CFX (better than Fluent in my opinion), and I have a powerful 64-core Opteron server with tons of RAM that can do it with a fine mesh. (I suspect that many competitors will only use a low-density mesh and not do a mesh refinement analysis that would ensure the final simulation accurately captures the full behavior of the device, and I don't criticize them for it because not everyone has a 64-core server sitting around
£494 GBP v 9 dnech
4,9 (7 recenze)
4,1
4,1
37 freelanceři nabízejí v průměru £436 GBP za tuto práci
Avatar uživatele
Hello there, I am a postgraduate CAD/CAM engineer with high proficiency in Ansys for CFD analysis. I would like work on your project and would deliver you all results you are looking for. Also, I will you complimentary Autodesk Inventor 3D CAD modelling service too I would be happy to work with you. To know more about me visit my LinkedIn or Freelancer profile Regards, Kartik Sheladiya
£600 GBP v 10 dnech
5,0 (25 recenze)
6,4
6,4
Avatar uživatele
Hello I have good experiences in flow simulation using CFD and analytical method. Especially I am familiar with nozzle design. I will provide all details supporting a new design of spray nozzle. Please let's contact. Thanks
£250 GBP v 10 dnech
4,8 (53 recenze)
5,8
5,8
Avatar uživatele
Hi I hope you are doing great. I have done Mechanical Engineering and I have been using Ansys Fluent for projects related to CFD for last 4 years. I have great command over Fluent module of Ansys. I have done projects related to CFD that include - CFD of wind tunnel - CFD of tidal turbine to improve its design - CFD of Boeing 777 wing I can show you previous work for quality check. I can get this job done on time with great quality. Contact me to discuss deadline and more. Regards,
£250 GBP v 3 dnech
4,7 (39 recenze)
5,5
5,5
Avatar uživatele
Hello, I can help with you in your project Spray Nozzle Analysis. I have more than 5 years of experience in Design, Engineering, Matlab and Mathematica. We have worked on several similar projects before! We have worked on 300+ Projects. Please check the profile reviews. I can deliver your job with in your deadline. Please ping me for more discussion. I can assure the 100% job satisfaction. Thanks,
£400 GBP v 10 dnech
5,0 (26 recenze)
5,3
5,3
Avatar uživatele
Hello, please look my past work and portfolio. I'd like to know more about your task. I mean boundory conditions, 3 model of nozzle. If you need I can sign NDA.
£444 GBP v 2 dnech
4,9 (17 recenze)
5,1
5,1
Avatar uživatele
Hello, I propose to simulate your project with COMSOL Multiphysics. since its structure allows to have a total control over the equations involved. I guarantee excellent results and a high level of detail in the technical documents. I suggest you check my profile on Freelancer about the FEA projects. I am currently simulating several three-phase linear motors and analyzing a project of a hydrogen battery for electric vehicles, but I have done other projects that include fluid physics, phase change, heat transfer and radiation. One example is the recovery of residual heat from photovoltaic panels through a thermodynamic process with which, through saturated steam, it transfers the enthalpy to a micro turbine. Contact me if you are interested in reviewing some reports of my projects, so you can see the level of detail
£555 GBP v 5 dnech
5,0 (7 recenze)
4,8
4,8
Avatar uživatele
Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things
£250 GBP v 5 dnech
4,4 (16 recenze)
4,6
4,6
Avatar uživatele
Hi, We are a team of Data Analyst. We have worked on several analysis projects over various tools and coding languages. So, it won't be a problem for us to work this project. It will be good if you can show the existing designs you have so that we can tell you details regarding work more accurately. With Regards, Shubham Sharma IDeepeners Team
£555 GBP v 10 dnech
5,0 (9 recenze)
4,0
4,0
Avatar uživatele
Hello, I am a Mechanical Design Engineer having good grip on engineering subjects. I have competencies in engineering softwares like Solidworks,AutoCAD and Ansys. I can do your work easily. We can discuss further in messages. Its will be an honour for me to help you through my skills. Looking forward for your reply.
£250 GBP v 3 dnech
4,9 (9 recenze)
4,1
4,1
Avatar uživatele
Hello, I'd like to apply to your job. I have hands-on experience in civil engineering field, performing advanced CFD analysis using mostly Ansys Fluent, Star CCM+ and other codes. A number of different assignments and engineering experience including Offshore Engineering, Wave and Tidal Energy, Waste to Energy, HVAC, Auto Motive, Infrastructure, Process and Food Industry. I hold a Master's Degree in Engineering Physics and I finished my Ph.D in Combustion Physics at Lund University. Varying with the knowledge in different trades such ad CFD/FEA analysis by using Ansys software and other pre/post processing tools: • ANSYS (FLUENT, MECHANICAL, AIM, SpaceClaim), STAR CCM+, FDS, ANSA ... • Programming skills: Fortran 90/95, 70, MATLAB, C • Multiphase Gas/Liquid, Solid/Gas Reaction Kinetics Modelling • In-house workstation with 20 CPU, (40 threads) and 256 GB RAM Dedicated engineer, that understand deadlines and provides a high quality of work. I look forward to applying my skills and experience to your projects. Best Regards, Fikret Saric
£555 GBP v 10 dnech
4,5 (9 recenze)
4,4
4,4
Avatar uživatele
Hello. I am Amil, Msc Mechanical engineer. I am EXPERT in CFD and FEA analyse. I use SolidWorks for my CFD analyse. Message me and we will discuss more in chat.
£250 GBP v 10 dnech
5,0 (1 recenze)
3,4
3,4
Avatar uživatele
Good morning, I am a CFD expert specialized in turbomachinery design and analysis. On ANSYS CFD side, I used to train people for Fluent, CFX, ICEM CFD, etc. Are you expecting to have a multiphase analysis with Lagrangian and Eulerian approach. Or do you need a single phase analysis?
£370 GBP v 24 dnech
4,8 (5 recenze)
3,7
3,7
Avatar uživatele
Hi, here is Omar a Mechanical Engineer. I have noticed your project, and it strongly interests me, I have three years experience dealing with computational fluid dynamics and working via ANSYS fluent commercial software program, you can ask for work samples, though. Kindly end me the design you have to discuss more details concerning the spray nozzle. Thanks
£250 GBP v 5 dnech
4,0 (6 recenze)
4,0
4,0
Avatar uživatele
Hello, I am an aerospace engineer. I am experienced in product design and simulation, and spray nozzle is one of the components we deal with in an important part of the airplanes, the engine. I have wide experience in ANSYS fluent, and I carried out many similar analyses. I can make this one for you and take into consideration design requirements, changes, and comparing results. I set 10 days for that project, my machine specs is i5 2.7 GHz processor and 8 GB ram, depending on mesh requirements, problem setup and number of studies to be carried out, this deadline is subject to some change. looking forward to be in touch with you soon. Kind regards
£700 GBP v 10 dnech
5,0 (6 recenze)
2,8
2,8
Avatar uživatele
Industrial engineer and project engineering Phd. More than 8 years experiences with MATLAB/ANSYS/SIMULINK/R/SPSS/EXCEL/SOLIDWORKS....I can solve all your problem in the field of : mathematics, electrical engineering, mechanical engineering,control and automation, data analysis, strengh of materials, physics, fluid mechanical, computational fluid dynamics, system modeling, heat transfert, hydraulics, statistics, linear programming,finite element analysis. free to colaborate with you (long term) please see my portfolio Best regards
£618 GBP v 4 dnech
4,7 (9 recenze)
3,2
3,2
Avatar uživatele
Hello, I have a background in chemical engineering with a Ph.D. degree from the University of Alberta. I can help you with your project as I have done many CFD/FEA projects using ANSYS (Fluent, CFX), Autodesk, Comsol, SolidWorks. Here are some examples: - Simulated turbulent flows (k-e, LES) in various geometries (2D,3D) - Simulated bubbly flow, slurry flow, and slug flow in pipes and constrictions - Simulated injection of fuel in a combustion chamber - Simulated injection of bubbles in a cavitating flow - Simulated VAWT using dynamic mesh in Fluent - Simulated reaction in packed bed reactor, batch reactors, ... - Simulated natural convection flow in a solar tower and chimneys - Simulated ICE engine piston motions in Fluent - Optimized the design of a compressor blade for maximum efficiency I am available 24/7 and can start your project as soon as possible. If interested please contact me to talk in more detail about the project and define our milestones. I Look forward to hearing from you. Regards Shaham
£750 GBP v 10 dnech
4,0 (1 recenze)
2,8
2,8
Avatar uživatele
Hello Sir, BEprojects is the Engineering Design Service Provider to supply 3D Modeling, Product Design & Development, CAD Drawing, FEA & CFD Simulation, Mechanism Video, 3D Printing, Manufacturing & Fabrication. Promises you with best service. 6 Years we are serving to customers. To expand business, We are here as a freelancer. We promise you to get project completed in time with accuracy. BEprojects_co_in
£250 GBP v 3 dnech
5,0 (1 recenze)
1,6
1,6
Avatar uživatele
Hello, I have checked your requirements on this Spray Nozzle Analysis. Please say “hello” so that we can discuss further.
£555 GBP v 10 dnech
0,0 (0 recenze)
0,0
0,0
Avatar uživatele
hola buenas tardes, realizare los analisis que necesites con el software solidworks y su interfas flow para conocer las carcateristicas del flujo dentro del mismo y una animacion en donde podras observar el flujo y su movimiento dinamico. hello good afternoon, I will perform the analysis you need with the software solidworks and its interfas flow to know the characteristics of the flow within it and an animation where you can observe the flow and its dynamic movement.
£555 GBP v 10 dnech
0,0 (0 recenze)
0,0
0,0
Avatar uživatele
Hi, I'm interested in the project. we can do it as soon as possible. Let's do the improvement to get best results. please feel free to contact me
£450 GBP v 10 dnech
5,0 (1 recenze)
0,0
0,0

O klientovi

Pochází z UNITED KINGDOM
Wigan, United Kingdom
0,0
0
Ověřená platební metoda
Členem od čvn 13, 2018

Ověření klienta

Další zakázky od tohoto klienta

Patent Application
£750-1500 GBP
Díky! Poslali jsme vám e-mailem odkaz pro získání kreditu zdarma.
Při odesílání e-mailu se něco pokazilo. Zkuste to prosím znovu.
Registrovaných uživatelů Zveřejněných projektů
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Načítání náhledu
Bylo uděleno povolení ke geolokaci.
Vaše doba přihlášení vypršela a byli jste odhlášeni. Přihlaste se znovu.