Code Mikrotik Wifi radio

Need firmware written for Mikrotik radio. With this need to configure routerboard IP, the onboard radio as tracker and mini PCI-e card as Wifi Board type - Router board - RB912UAG-2HPnD Wifi board - R11e-2HPnD and full pre-assembled unit - Metal 52AC Type Access Point Tracking unit Initial IP [login to view URL] SSID and login - admin password- admin Select unit type either AP or tracker then goes into either of the setup screens Access Point will have Webpage config page for easy setup to 3 types of operation with some user selectable variables. Variables SNMP name SSID1 name and password SSID2 name and password SSID3 name and password SSID4 name and password SSID5 name and password Channel selection Power wireless mode (eg 802.11b/g/n) Web interface log in NTC sync IP address (fixed or DHCP), DNS, gateway, subnet SNMP details for monitoring VLAN 1 through to 32 name and number VLAN port mapping and SSID mapping Tracking unit will have selections for channels to monitor 1 through 11 selectable RSSI threshold for storing record level Tracking host server address sync frequency in seconds Both style will also need SSH config page NTC - setup and sync network time or manually set time, if syncing set how often to sync also Both units will have a diagnostics/status page at minimum Wifi devices connected with details like RSSI, and data Tx/Rx Device connected sorted into SSID groups LLDP neighbors Voltage, temp, time, firmware version, mac address, Restart, Firmware update, factory reset (defualt unit to initial config screen, IP address [login to view URL]) live monitor page to show current mac addresses transmitting, RSSI and time to last seen in seconds Also setup a default SSH log in admin admin