Design a plug handle for electrical cord

$30-250 USD

Dokončeno

Zveřejněno

před více než 5 roky

$30-250 USD

Zaplaceno při doručení

We need you to design a plug handle to fit onto the end of the cable as shown. The handle should be a two-piece "clam shell" design so it can be assembled without removing the plug terminals. The dimensions should be approximately 5 inches (127 mm) square and 9 inches (230 mm) long. If you're hired, of course I will provide you with all the exact dimensions of the cable and the existing plug end. The attached photos show what we're working with. One of the photos shows an example plug handle - your design should not be exactly the same, but it should be of a visually compatible appearance. I've also attached a poorly drawn sketch of the type of handle that could work well here. You will need to design the handle and make sure it would fit the existing cord and plug end according to the dimensions I will provide. Allow for seals to maintain IP55 rating for water-resistance. Deliverables will need to be in an industry-standard format ready for 3D-printing (STL format preferred).

3D Modelling

CAD/CAM

Product Design

IČ projektu: 17916316

O projektu

11 nabídky

Vzdálený projekt

Aktivní před 6 roky

Chcete si vydělat nějaké peníze?

E-mailová adresa

Výhody podávání nabídek na Freelancer

Stanovte si rozpočet a časový rámec

Získejte za svou práci zaplaceno

Načrtněte svůj návrh

Registrace a podávání nabídek je zdarma

Uděleno:

@aditya099

hey there, that seems like an ev charger. i am experienced with design and development of electric vehicle parts. please send me a message to discuss. I worked on developing a complete development from basic render to final production design of an electric motorcycle. I can do this job with high quality results.

$100 USD v 2 dnech

5,0

(5 recenze)

3,0

11 freelanceři nabízejí v průměru $160 USD za tuto práci

@abushahama

Hi there, My name is Abu Shahama. I’ve read your brief and can see that you’d like to design a plug handle for an electrical cord with IP55 rating. I can provide 3D CAD model, manufacturing drawing, STL for 3D printing, 3D renders. My team has 7 years experience in product designing and manufacturing engineering. I can use SolidWorks to design this plug handle. Please visit my portfolio page for the similar projects completed by us:- https://www.freelancer.com/u/abushahama

$150 USD v 3 dnech

4,8

(97 recenze)

6,4

@valentinbudeanu

Hello ! Your project is of much interest to me and I would be pleased to do it. During my work, I will provide the ultimate revisions and make all the necessary changes upon request until you are completely satisfied. Kind regards, Valentin

$140 USD v 2 dnech

4,9

(38 recenze)

5,3

@PolaEssam

Hello Sir, I am Mechatronics Engineer, I have great experience in this field , I will not talk about myself let my profile describe me , besides I offer high quality for low cost , and you don't have to pay without being satisfied Thank you,

$155 USD v 3 dnech

4,8

(9 recenze)

3,1

@Valuesolutions

Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things

$188 USD v 3 dnech

5,0

(1 recenze)

2,4

@poojacraft

We guarantee you the best service. we will provide you the best service. We will give you the design you want. We will do a great job in less time and we will give you creative and attractive design. If you give us this project, we will provide you the best service. We have experienced designers. Our creative designs can be viewed on our portfolio. Thanks Prabhas

$200 USD v 1 dni

0,0

(0 recenze)

0,0

@rubencpaulo

I have 5 years of experience working with Solidworks: 3D modeling and 2D Drawings without counting more five years on college. I will be happy to work with you.

$200 USD v 3 dnech