Cdma modempráce
codesys IOT library need help with programming a communication to a Cellular modem
Hardware: 1) Jetson Nano; 2) USB hub STlink 3) LTE modem: Huawei E3372 4) USB camera 5) Pixhawk Task: 1) Create remote access via VPN with Jetson Nano using OpenVPN for example using LTE modem; I need remote access to the Jetson Nano. 2) Set up communication between Pixhawk and Jetson Nano, instructions: References: 3) Configure video streaming using LTE dongle to Ardupilot. 4) set up video recording in a separate folder on a USB flash drive with cyclic overwriting in case of filling.
...Another thing we want to integrate MPESA via a modem. In Kenya we have Mpesa Payment which is very popular. All payments are sent via SMS and confirmed via mobile phone. I want to improvise this by attaching a gsm modem to the server, such that when a payment is the sms is printed via the thermal printer and also cashier can be able to match the SMS payments details to respective sale Points To Note • Touch screen password login with numbers only. We eliminate use of username • Waiter’s to order from multiple locations on the POS to fasten order process. • Add items on existing order (Limited Role) • Bill Splitting. (Limited Role) • Bill Combining (Limited Role) • Voiding (Limited Role) • KoT on separate locations • Mpesa sms i...
...Another thing we want to integrate MPESA via a modem. In Kenya we have Mpesa Payment which is very popular. All payments are sent via SMS and confirmed via mobile phone. I want to improvise this by attaching a gsm modem to the server, such that when a payment is the sms is printed via the thermal printer and also cashier can be able to match the SMS payments details to respective sale Points To Note • Touch screen password login with numbers only. We eliminate use of username • Waiter’s to order from multiple locations on the POS to fasten order process. • Add items on existing order (Limited Role) • Bill Splitting. (Limited Role) • Bill Combining (Limited Role) • Voiding (Limited Role) • KoT on separate locations • Mpesa sms i...
K zobrazení podrobností se zaregistrujte nebo přihlaste.
I have a server and when GoDaddy changed my IP, of course I updated my sites, but from that day problems start...this via remote assistance before popping-in. The same applies to my other clients' PC. Only their PCs cannot access the sites that I host on my server. I have tested them via remote assistance, too. And all this happens while rarely they can see their sites for 1-2 minutes and then again downtime (I repeat, only from my clients' PCs and WI-FI networks). It seems there is an issue with their modem-router devices, probably Cache or so, that I do not know how to clear, if this is the problem. I have been driven mad with all this difficulty. A specialist who will be able to help me resolve this issue will receive a bonus from myself because I experience a very h...
Hardware: 1) Jetson Nano; 2) USB hub STlink 3) LTE modem: Huawei E3372 4) USB camera 5) Pixhawk Task: 1) Create remote access via VPN with Jetson Nano; 2) Display real-time video from USB camera when starting Jetson Nano; 3) Configure video streaming using LTE dongle to Ardupilot. 4) set up video recording in a separate folder on a USB flash drive with cyclic overwriting in case of filling. 5) Set up communication between Pixhawk and Jetson Nano, instructions: References:
Hi, We need help related to Computer Networks Course. Please bid if you have grip on following topics: CDMA OFDMA Slotted Aloha Error Correction, etc. Please bid if you are available to help in next few hours. Thanks.
Hardware: Modem: ZTE 660 Switch: TP-Link TL-SG116 Router 1 TP-Link Archer AX11000 V1 Router 2 TP-Link Ax5400 Dual Band Archer Ax73 See on attached picture the network i need Configurate Mesh Between the 2 routers (they have this function) Configurate VPN (i have a nordvpn account) Configurate the IP´s Wan and Lan correct so i can access the router I need be able access the 2 routers administration from PC and Mobile
Hi, I'm looking for a VPN expert. Is it possible to put a VPN directly into the Modem. Currently I have a Nord VPN through my iPad so I cast programs to the TV from there. If possible I'd rather not have to do that. I've attached a photograph of the router that I use
...Evaluation (Must be an English Speaker) ? Data Collection (Turkish, English or German Speaker) General Requirements ▪️ Excellent web research skills and analytical abilities ▪️ Excellent comprehension and written communication skills ▪️ High-speed internet access (Cable Modem, DSL, etc.) ▪️ A personal computer running Google's free Chrome web browser, version 45 or newer, or, for some assignments, specific mobile devices – i.e., smartphones, tablets, etc. ▪️ Up-to-date anti-virus and anti-spyware software Join the fun with AI Technology! Become an Appen Contributor now! Apply Now! What to expect when you apply: ▪️ Create an Appen Account ▪️ Complete your profile
Hello i have the hex rb750gr3 and i would like you to do he following setup it will run in router mode after the dsl modem router ETH1: connected internet gateway from dsl router modem ( is the modem and .. to be the mikrotik) ETH2: connected second future dsl router modem FOR LOAD BALANCING (to have extra speed) to be the future modem ETH3: dhcp server with pool range 192.168.88.1- ETH4: dhcp server with pool range 192.168.1.2- ( for the mikrotik) ETH5: in bridge with eth4 ---------- i will use the eth3 for my clients and the eth4&5 for my private devices. Concerning the clients(eth3) i want to be able to see all together in one screen, how much time they have been active and their total traffic without using
I have power line in plugs i want to transmit the data from power line to modem without microcontroller by protocol or something
...phone jammer with remote control is designed with five high-gain antennas, giving you 10 watts of power output to completely block all 3G, GSM, CDMA, DCS cell phone signals within 50 meters. This high-quality jamming device allows you to remotely turn your device on and off for instant jamming and shutdown. You can also control the power size through the knob switch to control the range of the jammer, which is very powerful. Key Features: 1. Adopt five high gain antenna design; 2. Remote control, very convenient; 3. Interference range up to 50 meters; 4. 10W output power - Blocks the strongest signal interference; 5. Can interfere with all 3G, CDMA and GSM cell phone signals; 6. Comes with mounting accessories that allow you to mount it on the wall/ceiling.
Control an electric water valve based on flow and pressure sensors. 12V operating voltage. Report water flow readings via email and GSM modem. Display water flow in real time on a screen/LCD module. Design PCBA, write code, provide manufacturing files and source and machine code. Sensor data to be simulated by you during code testing. Modifications to code may be necessary during actual field testing in USA. Full operation function and specifications provided. This is a very simple project for an experienced person. Budget is USD150
I would like to get a modem 3D render some of a ChargeYard.
I would like to get a modem 3D render some of a ChargeYard.
Broadband ping erratic and causing severe lag. Line tested perfect by ISP. Modem replacement ordered but I believe something on the network is causing issue. We use a fortinet 100d firewall and the modem is f2000. I need help to diagnose if the issue is caused by a device on our network
I have an SMS software that needs updating. I need multi port and multi device recognition. Able to use ID to use Specific GMS Modem per client. Create UI .NET C# developer needed. Software is currently working fine. Also we have integrated API Twilio. Please only bid if you experience with any SMS related work.
I need you to create a circuit connecting correctly an AVR microcontroller and a power line modem () for the AVR to send and receive data on power line. You must read the datasheet and implement the recommended security features such as overload protection. The circuit must also offer a connector to upload the program to the AVR from PC. You must use KiCad or another open source software to deliver the project.
Hello Sir I have a project in Iraq to optimize RF plan for the CDMA /EDVO Network . I need expert Engineer to work with us ,our project to that large but we have issues in gaps among regions .please contact me for more details Thank you
Need a telecommunications engineering expert to work Telecommunications engineering project on Wiedeband CDMA that involves MATLAB and C++. It involves the following:- • The mean path loss, • The maximum coverage distance • formulation of link budgets under different scenarios (while considering data rate, indoor versus outdoor versus vehicular use, etc.) • The peak up-link capacity of a third generation W-CDMA cell carrying three types of traffic • The load factor • The aggregate user data rate on the uplink • the number of Orthogonal Variable Spreading Factor codes available for voice circuits • decode the WCDMA signal in the Matlab file. • identify the scrambling code and signal strength of the Pilot CPICH • identify the ...
I need a program to simulate the working of an 8-ask modem fir Eb/No=1-7 db.
I need help connecting my sonicwall to a comcast cable modem.
set up port forwarding for NVR it is a simple port forwarding job with TP Link modem and Dahua NVR using DDNS. I need someone to take a look or advise
I currently use an Apple box as a cable box for Altice one. It only works in home connected to a Ubee modem/router combo. It does not work out of the home, says to connect to home network. Can someone setup a vpn on the Ubee modem/router so that when I use the Apple box in a remote location, it will work as an in home cable box???
My project consists in a circuit board which is responsible for communicate with the internet and triggering 4 electronic locks of 3V 1.5a using relays. Due...the microcontroller circuit to avoid crashes/bugs. The board must have a circuit of lithium battery which must provide an autonomy of at least 8 hours. This circuit will be activated when the site is without power. To connect the ESP32 to the internet, a 4G modem is connected to the board. The board must have a female USB connector to power the 4G modem. The female USB connector must have a circuit capable of having its power interrupted by a command sent by an ESP32 I/O port (After a few hours of initerupted use the 4G modem loses its internet connection and it is necessary to turn it off and on to ...
Hi Ajai X., As discussed please install a modem and install sim card services. Starting 10:30am IST Saturday 17th Sep.
To view my CCTV cameras In my primary office I just need to type the IP address of the NVR and i can log in to view all the cameras. My requirement is to do the same from my secondary office which is in a different city. As i can view it only if i am in the same network with some research i heard it can be done if connect to the primary office via VP...VPN needs to be free 4. To always establish a secure connection as we are hosting a few servers from the location so we need to be safe from any kinds of hacks. 5. Transfer/stream must be as fast as possible for a smooth video. ( we will upgrade the ISP if need be) 6. Open to suggestions to change the ISP router if needed for this project. 7. Need to know if the vpn can be established on the modem/router level than on individual ...
This is a big project and we need a big team The app should work on IOS and android It will have one app for customer onr for driver and one for restaurant/store We will need you to design/code/debug and launch thr apps We will need a modem design and modern features (GPS location of the driver, Al robot that will help the User and many more stuff) So of course it will have all the basics features of an delivery app
We have slow wireless in our tall house. We have a cable/modem (for landline via Rogers) and an Smart RG 2.4 ghtz (via Tech Savvy). We need the slowness resolved asap. Want to investigate a mesh net/wireless upgrade.
Suppose you have a motor connected to a motor circuit breaker such as a Schneider Electric GV2ME08AP. This breaker can have add-on contacts using GVAE11 or GVAN11 extra modules, so there are some Normal Open and Normal Close contacts to work with. You have a modem-router with a sim card to provide internet access to the place of installation. An ESP32 module or a small PLC is there to connect. The end user must be able to connect from another city(!) to the ESP32 or PLC through a simple web page. The web page must me in a free web site creator such as Google Cloud or Wix web hosting. The ESP32 or PLC and the user PC are connected to a different wi-fi spot. I need to see the state of each motor even if I am in a different country! There are 15 different places, each one far along...
.Net Project to send database information on SMS using AT Command through Modem
Hello after a home page website design something nice sexy with class full modem design this is for a single female escort please note there are naughty photos attached please be aware right now we need a home page mockup here is a demo site However please do not copy the design they want something like this but not copy The whole site needs to be white and pink to match the logo
I need to design and prototype the GPS tracker with WIFI and Cellular Connectivity. Please feel free to ask the details on chat.
Hello, We require a nice sexy escort website to be designed we have a logo and we want the coluers to match the logo something fresh modem and with style
Hi need someone who can make fresh modem website and design that focus in selling domain name. Install the API from rrpproxy(net) . Setup stripe payment system and make it work for my website. Design must intergate with whcm(dot)com billing system. No ready made template I'm focusing in selling domain name. So the website must be look more to domain name industry then normal web hosting site. Please PM me thanks
...Computational, Phonetics, Pronunciation, Annotation, etc.) • Lexicon Annotation • Speech Evaluation • Image Annotation and/or Transcription • Video Annotation • Sensor Data Annotation i.e., LiDAR, Radar, etc. General Requirements • Excellent web research skills and analytical abilities • Excellent comprehension and written communication skills • High-speed internet access (Cable Modem, DSL, etc.) • A personal computer running Google's free Chrome web browser, version 45 or newer, or, for some assignments, specific mobile devices – i.e., smartphones, tablets, etc. • Up-to-date anti-virus and anti-spyware software What You Need To Be Successful • You must be smart, curious, and enjoy onlin...
...follows Router configured to -Allow internet to any of the devices on the network but block other traffic -Set up static IPs for around 5 or so devices on the network -Set up DHCP on the router so any device can just be connected to the network including access points.. -Port forwarding for our NAS server so whoever is working from home can access it anywhere. -Port 0 will be the uplink to the modem/internet that we have through xfinity -Ports 14 and 15 need to be trunked to connect to the switch. These are SFP ports -If possible Port 1 as a backhaul to the switch incase something happens with the fiber connections over the trunked ports. Switch configured to -Ports 2 and 3 of the SFP ports trunked and connected to the switch. -Port 0 connected to the backhaul of the router -Port...
Hi need someone who can make fresh modem website and design that focus in selling domain name. Install the API from rrpproxy(net) . Setup stripe payment system and make it work for my website. Design must intergate with whcm(dot)com billing system. No ready made template I'm focusing in selling domain name. So the website must be look more to domain name industry then normal web hosting site. Please PM me thanks
Hi need someone who can make fresh modem website and design that focus in selling domain name. Install the API from rrpproxy(net) . Setup stripe payment system and make it work for my website. Design must intergate with whcm(dot)com billing system. No ready made template I'm focusing in selling domain name. So the website must be look more to domain name industry then normal web hosting site. Please PM me thanks
Help improve smart home technology in this fascinating project that requires you to be creative and put yourself in the shoes of a smart home user! Requirements: • Must be a resident Jordan • Ability to work independently with minimal supervision • Possess a high-speed internet connection (Cable modem, Fiber, DSL, etc.) • Fluency in the Arabic language Interested? Register now! Choose Arabic (Jordan) as your primary language. To get started, click the "COMPLETE PROFILE" button, to gain more access to all available projects. Complete all the needed information and click the "SAVE AND SUBMIT PROFILE" button. Once you complete the registration process, you will be able to receive feedback via email or direct
...like map box. The idea behind this product is to track the location of a vehicle when completing trips in remote locations. Location data will be pulled from a API managed by Swarm, and will include the following variables (Date and time, Longitude, Latitude, Speed (km/h), Course (degrees), Altitude (m), Solar voltage (V), Solar current (A),Battery voltage (V),Battery current (A),RSSI value (dBm),Modem current (A) ) Ideally i would like the following features - Ability to create individual logins for users. - Ability to create groups to track multiple users on one map. - Ability to create Guest accounts for sharing location with friends / family. - Display of the data listed above when clicking on the recorded location. - Database with historical information. - Ability to not ...
can't get cctv to work after changing service providers
Cheers, I want to manage the USSD code of my mobile, so that it is not necessary to press the numeric keyboard, to make a request in the background. - I have my mobile here ...here and if I press: #222*1# I click OK, I can see the call balance that remains on my mobile phone. - I want to execute this code from a request, without using a button or keyboard or from a GSM MODEM - That something is listening on my mobile and if it receives a request, it executes the USSD accordingly and sends the response - I want this to respond as an API, all in the background to send requests, the requests will come from a WhathsApph chatBoth developed with Node.js Any method or form is good for me, I have a chatBoot and I need to call this USSD code and it will impact my phone or GSM MODEM...
Just changed over from Comcast to WOW cable provider. Need Arris SBG-8300 cable modem to be configured as a Static Ip and that it runs IIS web site correctly on Windows 2016 Server. Can provide remote access to target server.
I have a firmware for my Simcom modem, and I am countering errors in the ability of the firmware in reading the responses from AT commands. For example, the AT commands (AT+CREG?) gives OK but the firmware couldn’t read it. I need someone has experienced similar issues and resolved them.
...Specification was: XXXX Up to 5 sensors in the modem, each to be viewed with its own data. The MODEM and PIC (ALREADY DESIGNED and BARE PCB MANUFACTURED) XXXX-Modem that will report back by wifi (or sms if no wifi) using the sms card to a central server of a simple report and identification of the modem. The modem will take the variable volts and when these volts are transmitted to the server it will show an actual range of capacity values commensurate with the volts as capacity level Empty to full. This will show as Green/ Anber and Red on dashboard The solar panel power to be disconnected once battery gets to full voltage. XXXX There is to be a small 12V battery in the device XXXXAbility to add up to 5 sensors in the modem XXXX-The ...
I have just got installed a new PC in my office. This is the new server. It has a printer connected to it. There is one other PC and 2 Laptops. All the systems are connected through a modem (or router) and share files and folders of the server system along with the printer. Soon after the new System(Server) has been installed few of the websites like and Banking websites are not working in any of the systems. I want someone to look at the networking issue and resolve this problem. Earlier there was no problem in sharing the printer (when the new server was installed) but now the printer sharing has also stopped.
