Inverter 12v 19vpráce

Dobrý den, máme shop s bateriemi, adaptéry a klávesnicemi. Běží na Prestashopu. Každý produkt v eshopu má několik stovek kompatibilit. Potřebujeme vytvořit XML feed, který bude generovat názvy v kombinaci s každou kompatibilitou. Příklad: NABÍJEČKA NA NOTEBOOK ACER 19V 3.42A (5.5X1.7) Kompatibility v databázi: Acer Aspire 1200, Acer Aspire 1200X, Acer Aspire 1200XV, Acer Aspire 1202, Acer Aspire 1202X, Acer Aspire 1203X, Acer Aspire 1203XC, Acer Aspire 1203XV, Acer Aspire 1360, Acer Aspire 1410 Výsledek v XML exportu: NABÍJEČKA NA NOTEBOOK Acer Aspire 1200 NABÍJEČKA NA NOTEBOOK Acer Aspire 1200X NABÍJEČKA NA NOTEBOOK Acer Aspire 1200XV NABÍ...

K zobrazení podrobností se zaregistrujte nebo přihlaste.

...(photoroom pic) 2nd page - Attached is an example please design and don't use this exact one - BMPRO logo bottom left hand side - a pic of the product ( photoroom pic) bottom right hand side - make this pop out at you almost like a 3D image to get your attention - The following in dot point format on the left hand side in BMPRO fonts (attached) *1600W Pure Sine AC Inverter *DC (5-24V) And AC (240V) Out/Input *12 Power Outlets *1485Wh (12V 120Ah) *Core LiFePO4 (lithium) Benefits *Light Weight For Easy Transport *Integrated MPPT Solar Regulator *Ergonomic And Robust Case *Extensive Certifications *Non-slip Rubber Feet *Fast Charge Rate – 2.5hrs To 80% *High-contrast LCD Screen *Active Cooling *5-year Warranty - the following heading in BMPRO fonts (attached) &q...

I'm seeking an experienced Electrical Engineer to help with the integration of device communication protocols. Key Responsibilities: - Implement communication protocols for integration - Ensure the device can communicate seamlessly with other systems Ideal Candidate: - Proficient in power electronics and inverter hardware design - Experienced in integrating device communication protocols - Strong understanding of electrical engineering and power systems This project will require a high level of technical proficiency and attention to detail. The successful candidate will have a proven track record in similar projects and be able to deliver high-quality results within the agreed timeframe.

...Project Details: - The primary purpose of the PV system is power generation. - I need the simulation to provide details on basic electrical parameters and arc dynamics. - I need the simulation using different arc models (Cassie, Mayr, Habedank, Kema, Paukert, Modified Paukert, and Heuristic model). - The Pv system should be connected to the grid. - The Pv system should have a dc-dc converter and inverter. The ideal freelancer for this project should have: - Strong expertise in MATLAB - Simulink - Experience with simulating electrical systems - Familiarity with photovoltaic systems would be a plus - **Fault Duration and Conditions**: The simulation should be able to replicate varying dc arc fault durations and conditions to ensure the robustness of the system in different scenari...

I'm looking for a 5kW solar inverter specifically designed for residential usage. It should be equipped with a battery backup system to ensure continuous power supply during outages. Key Requirements: - 5kW Power Output: The inverter should be capable of handling 5kW of power, suitable for residential usage with inductive loads. - Battery Backup Compatibility: It must be designed to work with a battery like lead acid and LifePO4 battery of 48V which will be a 16 string LifePO4 battery.. This is crucial for ensuring uninterrupted power during times of outages or low sunlight. -Tgere whouxl be an lcd screen to do settings and check status. - Residential Suitability: The inverter should be designed for residential environments, taking into account factors like spa...

I'm in the process of renovating my house and I'm in need of a skilled Solar Engineer to help me with the second fix of the Solar Installation. The ideal candidate should have experience and skills in: - Wiring and connections: You should be able to efficiently connect the solar panels to the inverter and the system to the grid. - Mounting solar panels: You need to be able to install solar panels on the roof according to the solar plan. - Testing and commissioning: Once the solar panels are installed, you should be able to test the system thoroughly and commission it so that it can start running. I'm looking specifically for someone with experience working with Monocrystalline solar panels. Please note that you would be responsible for providing all materials nec...

...electrical engineer to design a multi-output power supply for a portable AC servo drive. The ideal candidate will have expertise in power electronics and PCB design, with a proven track record of creating efficient and compact power solutions. Input Specification: 220Vac. Output Specifications: Two sections are required: Power Ground Circuit: +15V, +5V. Lower Ground (controller) Circuit: +12V, +5V, +3.3V, -12V. Ensure that both grounds are isolated from each other. The design must be lightweight and compact, suitable for a portable device. We need the design to be highly reliable and efficient, with considerations for safety and durability. Job Responsibilities: 1) Design: Develop a schematic and board layout for a multi-output power supply that meets the specified req...

I'm looking for a skilled individual who can create a sketch for a rather specific and interesting project. Key Requirements: - Utilize a crash sensor micro switch: This element is the core of the project as it's designed to respond to an impact and trigger a series of events. - Trigger a 12v motor: The motor should start running as soon as the sensor detects an impact. - Simultaneously play a short MP3 file: The audio should begin playing once the sensor is activated, but it should be less than 30 seconds in duration. - Activate a solenoid latch: This component is crucial as it performs a critical function in the project. The solenoid latch should be triggered once the motor is on and the music is playing. - Stop the music and motor: Once the solenoid latch has ...

K zobrazení podrobností se zaregistrujte nebo přihlaste.

Hello, For a new project I need a IOT sensor that will be installed on a device that rotates. I need to know the am...rotates. I need to know the amount of rotations so I can service the device before it will break down. My device is not always connected to WiFi/Internet. I would like to see the amount of rotations on a remote location but I don't have to see them realtime. One update per day or per week is enough, don't know it makes a difference, but if so we can reduce the amount of data transmissions. 12V is available Pulses are count with a rotary encoder and based on the device type I have to set the pulse count per revolution. The name of the device must be adjustable so I know which IOT is connected to which device. Please let me know your though...

...microchip to control multiple DC motors and MOSFETs, with integrated voltage regulation. This project requires expertise in high-power applications, voltage regulation, and serial communications. Project Requirements: Microcontroller: RP2040 chip to manage all operations. Power Handling: Board must handle input of 24V. Voltage Regulation: Conversion of 24V input to 12V and 5V outputs. MOSFETs: 5 MOSFETs for 24V, 7A control. 4 MOSFETs for 12V, 5A control. Communication: USB Type-C for robust serial communication. Inputs and Outputs: 2 analog inputs. 1 One Wire communication interface. Additional pins for digital input/output as required. Deliverables: Complete PCB design files ready for manufacturing, including gerber files. Schematic capturing and PCB layout. BOM (Bill ...

...involves utilizing both inputs/outputs and write a code in C language The project requires 7 inputs and 6 outputs. - Inputs : Time Temp sensor probe Soil moisture sensor VPD sensor PH sensor EC sensor Water level sensor - Output : 2 x Peristaltic pumps 2 x 12v pumps AC Fan (PWM-controlled EC-motor) 220v water motor pump (using Solid State Relay) inputs/outputs will need to be set up and configured and based on the reading of the input sensors the Microcontroller will control the outputs. The successful freelancer will need to provide the following : Full electronic diagram. List of the...

...встановлювати температуру через джойстик. Треба щоб значення температури регулювалась через PID-регулятор (програмно) для того щоб пристрої охолодження та нагріву змінювали потужність плавно в залежності від поточної температи. Список датчиків та деталей: 1. Датчик вологості та температури DHT11 (Є також bme 280) 2. Датчик газу MQ2 3. LCD1602 з i2c 4. Джойстик для ардуіно 5. Вентилятор 5v або 12v - для охолодження повітря (такий який в ПК встановлюється) 6. Нагрівальний елемент – лампа накалювання (не остаточний вибір) P.S. якщо треба щось ще чи краще використовувати іншу деталь - напишіть

I've got a commercial warehouse that requires an efficient, robust photovoltaic system designed to satisfy high levels of energy consumption, more than 5000 kWh per month. I am seeking an experienced professiona...performance, and highly efficient photovoltaic system which ensures seamless operations and significant cost savings in the long run. I would like to have: - System sizing using one of the solar system design software - Performance report of the solar system: what's the power generation all year through at the given location - Financial analysis - BOM: list of material given the solar panel and inverter I chose, power optimiser, log, monitoring software, cables, electrical security devices - Electrical scheme Basic information included into attached PDF Thank...

I’m looking to make a smart controller that can integrate with 12v compressors for inflating tires on off road vehicles. Mainly I need the the pcb and electronics designed and I can make the housing and everything else. If you would also want to design the housing in ok with that. Needs to be almost waterproof. Mainly splash proof and heat resistant. It will be mounted in the engine bay. As far as the controller goes all it need to be able to do is check pressure from a pressure sensor that will be connected in line from the compressor and control a 12v output source(5a at 12v) to trigger the compressor to turn on as well as for deflating need a valve to be controlled to air down to set pressure. Looking for keep it as simple as possible. Only gonna need about 4 ...

...original idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) • USB 3.0 (present in CMIO) • Ethernet (present in CMIO) • CANBUS • PCIe (present in CMIO) • SD card slot (present in CMIO) • HDMI to LVDS signal + backlight &bu...

I am looking for a freelancer who can provide a detailed quotation analysis as well as perform the operation and maintenance tasks for my 55MW ground mounted solar power plant. The primary foc...freelancer who can provide a detailed quotation analysis as well as perform the operation and maintenance tasks for my 55MW ground mounted solar power plant. The primary focus of this role is to perform routine maintenance and inspections on the solar power plant. Performance optimization is also a key aspect of the role. Specifically, I am interested in improving the solar panel efficiency, inverter efficiency, and overall system efficiency. Ideal candidates for this role should have a strong background in solar power plant operation and maintenance and experience in performance opt...

...a blown resistor, on my inverter. Its code is unreadable. I need to find someone who has the exact same version of this inverter, with experience in handling this kind of devices, to locate the original working resistor on the board, and take a photo of it, with a visible full code. The version of the inverter must be an exact match. It must be the Xian Ke Zhi, 48V, 5000W, and the sticker, and board layout, must be the same has the provided photos. This version does not seem to be manufactured anymore. There is a new version, that has a different sticker (blue instead of orange, and other differences), but the board layout is different, and it doesn't have the same resistor, in the same place. Priority will be given for someone who actually has the same i...

Hello there, I have a working Op Amp circuit that I would like to increase the output Gain from 2 to 4. I have +12v single supply, I have Schematic In Altium. Please Check attachment. Let me know if you can help.

I'm seeking a skilled professional to work on the PCB design for a BLDC Stepper Motor. I want to create the smallest board (ideally 15mm x 30mm or less). The motor requires 12v, I'm hoping for the PCB to contain everything, and there could be a third button for speed or an FWD/rev switch and a pressure button for variable speed. I've been looking at the Attiny85 and L293D to drive the motor, but I'm happy to change that up to anything else.

As a developer, I'm seeking expertise in crafting efficient C# code to interact with a JKBMS (inverter BMS). My needs are twofold. • JKBMS Read Operations: Your paramount task will be to read specific battery data from the JKBMS. The required data includes the battery's voltage, temperature, and State of Charge (SOC). • Integration with Existing Program: Once the data retrieval is done and example fully works. is to help me integrate it with my existing program. An accomplished C# programmer with prior experience in system integrations, particularly working with BMS systems like JKBMS, would be the most suitable for this task.

I require an experienced PLC programmer to look into my multi-level parking system. With a focus on: - Review of the existing PLC program - Troubleshooting potential issues using TeamViewer Currently, the system is experiencing errors during the parking or retrieval process which needs rectification. We changed the inverter to the parking system to Yaskawa. The PLC program may need to be reviewed as the automated process is no longer working. No error messages. Just not working as before The ideal freelancer is one who has: - Excellent understanding and troubleshooting skills for multi-level parking systems - Ability to successfully detect and resolve system errors - Prior experience with automated parking systems is preferred.

I require a skilled Electronics Circuit Design Engineer to create a power amplifier circuit for me. The desired specifications for this project are as follows: - Input: +12v, -12v square wave (bipolar/monopolar) - Frequency Range: 0.1 Hz to 1000 Hz - Output: +100v, -100v - Load: 500 ohms - Output Current: 200mA Key requirements for this project: - Designing a power amplifier circuit that can handle the specified input and output voltage. - Ensuring the frequency range is between 0.1 Hz to 1000 Hz. - The output should be capable of driving a load of 500 ohms with 200mA output current. Skills and experience required: - Proven expertise in Electronics Circuit Design, particularly in designing power amplifiers. - Proficiency in managing both bipolar and monopolar input. - Soli...

The project is to create Inverter automation to start export, stop export and charge the battery automatically using a microcontroller that can subscribe to the server to get spot prices to run the automation. Objectives: 1. Modbus read and write 2. ESP32 Webserver 3. Spot price subscribe 4. Calculation / rules 5. MQTT Service (Server) 6. Price Service (Server) 7. Device Dashboard (Server) Project scope and system architecture are referred to the project brief documentation "Inverter Automation Project "

I need assistance in simplifying the library management of a Platformio project. I need the openDTU Project to be simplified so that all the network and mqtt stuff is removed. I want just the inverter control functionality in that library so that im able to control it with the ESP32 without internet connection.

I need someone who can simplify a c++ project for me. The project is the openDTU repository on GitHub () . I want just the inverter control functionality without all the web and cloud connection stuff. I want a library where I can add a device and control it on a ESP32 directly without connecting it to the internet.

I am looking for a proficient C++ develo...who can simplify the openDTU projekt so that I will have only the inverter control functionality without all the other protocols. I want to be able to control the inverter with the ESP32 directly. over the nrf24l01+ module. The Projekt is found at: The OpenDTU is a DTU which enables control of multiple different solar inverters. The Projekt uses a web app to add/delete inverters and show or control the values which the solar panels are producing. I want to use the inverter control functionality inside of my own project so that I need library where I have the same features than in the web app but controled in my own code. So the task is to simplify the openDTU project for just the inverter control functionality.

I am looking for a skilled PCB designer to create a prototype that fits within a medium-sized, 2 to 4 inch space. This PCB should be tailored to contain an Arduino Mini and a 12V to 5V buck converter, with 3 pin and 2 pin JST GH connectors. The configuration of components on the PCB should follow a clustered arrangement to maximize space efficiency. This job does not require mass production capability at this time, with the primary focus being on creating a single prototype. Ideal candidates should have experience with Arduino components and compact PCB design.

I need assistance finishing a 12v circuit capable of effectively powering a LED light bar in a vehicle. Not ricer stuff, on an emergency vehicle. See attached diagram. Key job responsibilities include: - Designing a 12v circuit that fits my requirements - Adapting the design to the specific type of LED lights I use - Ensuring the configuration is optimized for 1-5 LED lights Ideal candidates should have: - Extensive knowledge of and experience with 12v circuits - Experience working with LED lighting systems - Strong problem-solving capabilities to troubleshoot potential issues and offer robust solutions - Excellent communication skills to explain the circuit design and any necessary precautions or maintenance tips. I value attention to detail and efficiency, so I w...

I am seeking an experienced electrical and HVAC engineer to design a comprehensive system for my large, 50+ feet house boat. This project involves designing an integrated electrical and HVAC system. Key requirements include: - A design that accommodates lighting, heating and cooling systems, and appliances. - Powering two 600 hp mercury engines on a 12v system with some low voltage lights. - Ability to utilize both shore power and independent power sources. Ideal qualifications: - Prior experience working with large boats/ships - Understanding of boat electrical and HVAC systems - Experience with multi-power source systems I look forward to enhancing the functionality and safety of my house boat with your expertise.

I need a highly skilled electrical engineer who can design an industrial-grade, slow-trickle charging circuit for lead-acid batteries. This device will be used primarily for powering backup syst...charging circuits for backup power systems. - Proficiency in using circuit simulation software. The final deliverable will include the circuit design diagram, a list of components needed, and comprehensive assembly instructions. I'm looking for someone who can provide a safe, reliable, and efficient charging solution for an industrial backup battery system. 18 numbers 12v Lead acid car battery Card power voltage (operating)- 12v DC Trigger Voltage -190v DC Stop Charging 216v DC the picture attached is of our present card used., We want to reduce cost and reliable. GRBL f...

HELLO :) We are already running on Espcode, that can pull/change modbus on solar inverters(mostly growatt) We need to expand this code, and make it able to take energy (Spot prices) into relation. We use ESP32 1. Be better grapchal looking (Web interface) 2. Access to the energy Prices (Live spot prices) 3. Be able to choose between DK1 or DK2 (This is price regions in denmark) (Also we need to expand to other countries later on) 4. Add tax/vat/tarifs 5. Code needs to be stand alone, meaning it should be able to run without home assistant, but also should be compatible with home assistant. 5. Allow Simple automations, like: Stop exporting electricity if spot price falls below X. or like Start charing battery if prices go lower than X Potentially we i will need you to work with us on ...

I'm looking for an experienced individual who can proficiently integrate a 20V LED strip and a 12V pump into a singular circuit for my hydroponics setup. The key functions required for my hydroponics system include: am building a small, table top hydroponic system for use in a home. This circuit will require timed controls of an LED grow light and water pump ( + inputs from buttons in the future). The components I am using are: LED grow strip: rated at 20v, 350mA DC Water pump: 12v, 5W DC Timed controls: Arduino Uno (5min on/55min off Pump, 16h on/8h off LED) I have built a simple circuit for timed controls of the water pump. This comprises of 12DC input from a constant voltage (12v, 30W) plug and IRF520 MOSFET module for control of the water pump. The Arduino o...

I'm looking for an experienced individual who can proficiently integrate a 20V LED strip and a 12V pump into a singular circuit for my hydroponics setup. The key functions required for my hydroponics system include: am building a small, table top hydroponic system for use in a home. This circuit will require timed controls of an LED grow light and water pump ( + inputs from buttons in the future). The components I am using are: LED grow strip: rated at 20v, 350mA DC Water pump: 12v, 5W DC Timed controls: Arduino Uno (5min on/55min off Pump, 16h on/8h off LED) I have built a simple circuit for timed controls of the water pump. This comprises of 12DC input from a constant voltage (12v, 30W) plug and IRF520 MOSFET module for control of the water pump. The Arduino o...

I am in need of a professional who has expertise in solar panel system that will be generating electricity for my home. Key requirements: - Proven experience with Hybrid Solar Inverter - In-depth knowledge of residential solar panel setups - Sufficient understanding of electric systems related to residential properties - Preferably certified in solar installation (but not compulsory) - Certified electrician The ideal candidate will guide me through the complete process, from equipment selection (if not provided) to full implementation, ensuring the system runs at maximum efficiency. Prior experience in similar projects is highly appreciated. I have already got the G99 application from DNO.

I'm in need of a skilled electronics engineer with experience in power management circuits. Your ...a PMOS switch to disconnect if required. There are a number of key criteria that must be achieved and are non-negotiable. - The passive current of the total circuit should be as small as possible <50uA, currently over 1mA - The design needs to be triplicated (see schematic) - The three circuits must be completely independent of each other, not share components - The components must be rated for 12V and over, otherwise they can't be used - The design must specify all components required and their Digikey part numbers You can modify the existing circuit or produce a new circuit using discrete components or provide off the shelf solutions. All options considered if they m...

As a solar energy enthusiast working with a Windows PC, I am seeking a proficient software programmer to write a program for USB to RS-485 communication. This program will retrieve real-time operating conditions from my solar inverter and present it on a visual dashboard - the program also needs to be able to change key operating parameters. Key Requirements: - Development of a program that facilitates communication between PC and solar inverter over USB to RS-485 - Enable the retrieval of real-time operating conditions data from the solar inverter - Create a clear, easy-to-use visual dashboard to display this data in real-time Ideal Skills and Experience: - Proficiency in software programming and systems integration - Previous experience with USB to RS-485 communica...

I'm seeking a skilled electronic engineer to design a 12V motion sensor alarm that's enhanced with a siren and key fob remote. This is a device focused on detecting movement with immediate effect as preferred. Key requirements include: - The alarm system gets activated instantly once motion is sensed. - The warning sound must be of a continuous alert type. A successful candidate will have proven experience in electronic engineering, specifically in designing and implementing sensor-based alarm systems. Familiarity with sound design is a plus. Commitment to time sensitivity and efficiency is essential. The chosen candidate should deliver a working prototype.

I am in search of an expert who can design and build a solenoid for me. The solenoid should be uniquely tailored to perform the following actions: - Pop up and down swiftly in a sequence of three times. - It should have the capability of a digital control for timed activations. - must be able to run on a 12v wiring for long periods of time - solanoid must be held firmly with plate. This unit should be housed in a container that is fully watertight, considering it will be used outdoors with potential exposure to wet conditions. The overall size of the unit must remain within the following dimensions: no longer than 300mm and no wider than 50mm in diameter. Ideal Skills and Experience: - Background in Mechanical or Electrical Engineering - Strong knowledge of digital timing contr...

... Також доступна можливість збільшення представленості та впізнаваності вашого інтернет-магазину в мережі, більш точного таргетування та, як наслідок, збільшення обсягу продажів пропонуємо підключити каталог ваших товарів до розділу «Де купити?» на сайті https://erc.ua. Приклад за посиланням: Додатково ви отримуєте безкоштовний ресурс для залучення клієнтів. Для розміщення нам необхідне посилання на ваш оновлений прайс-лист у форматі xml c обов'язковим зазначенням коду (артикулу) товару ERC у тезі <vendorCode> або <code> Рекомендована структура файлу: <categories> <category id="1">Категория товара</category> ... <item id="123123"> <categoryID>1</categoryID>

**Europe-based ONLY** We are in need of a knowledgeable and experienced Electrical Engineers with a specialisation in solar battery power systems (eg: AC/DC Inverter, LifePo4 storage). This project centres around the design, planning, and building of power generation/ storage systems inside trolley/ tool boxes. Skills and experience you should ideally possess: - Expertise in designing and developing portable energy systems - Understanding of the latest power generation equiment and optimisation - Experience on energy management, storage and power electronic technologies. Project deliverables include schematic designs, system layouts, and a comprehensive implementation plan for this renewable energy-based portable power station unit. If you have the necessary skills and exper...

Hello There! My name is Cosimo ...on Faraday’s law and on the induction equation “f.e.m.= magnetic flux/time” so you could make the aluminum part jump higher by giving the electromagnet more current (increasing the magnetic flux). But I would like to see if the formula works also in the other way: so by keeping the same current and supplying a higher frequency (so by reducing time in the induction equation) So I would need an inverter that can supply a higher frequency current (higher than 50Hz) to the electromagnet and keeping the 220V from the home power socket and see if the piece of aluminum actually jumps higher. I’m sorry if I wasn’t able to explain good enough for you to understand, so I’ll be more than happy to answer any question or ...

Hello There! My name is Cosimo an...Faraday’s law and on the induction equation “f.e.m.= magnetic flux/time” so you could make the aluminum part jump higher by giving the electromagnet more current (increasing the magnetic flux). But I would like to see if the formula works also in the other way: so by keeping the same current and supplying a higher frequency (so by reducing time in the induction equation) So I would need an inverter that can supply a higher frequency current (higher than 50Hz) to the electromagnet and keeping the 220V from the home power socket and see if the piece of aluminum actually jumps higher. I’m sorry if I wasn’t able to explain good enough for you to understand, so I’ll be more than happy to answer any question or ...

I have a wiring diagram for my lighting system. Hardware I am using: - 3.3v to 5v Logic Level Converter Module - NE555 DC Delay Relay (5v version) - DC to DC 12v to 5v Step Down Converter Module (5v, 3a output) - WT32-ETH01 (running WLED) - Wago Connectors - 12v Power Supply I need you to assess my wiring diagram, tell me why it's not working as intended and tell me how to rewire it. I will then follow your instructions. You're required to work with me until it is working as intended. My level of knowledge in this department is low. I can solder etc, but when it comes to understanding wiring diagrams found online, it's beyond my level of knowledge, so I need someone to not only know where I've gone wrong, but to visualise what I need to do in easy-to-u...

I'm looking for expert assistance with the electrical plan/schematic setup of a medium-sized swimming pool 30m2. This will involve the installation of pool lights, a pump system, a heating system and spare wall plugs for potential future use. Here's what I need: Switch/electricL box, containing circuit breakers and timer to control: -Pool lights - pump system - full inverter heat pump system - 4 spare wall plugs for future utilization - salt water solinator. The timer should control all the above, ecluding the pool lights

I am looking for a skilled electrical or mechanical engineer to develop a 12v motor speed controller specifically for an industrial machine. This controller will primarily serve to regulate and adjust the motor speed as needed. The equipment is designed to function in an outdoor environment and hence, the controller's design should take into account factors such as weather conditions and robustness. Key Requirements: - Proficiency in electrical/mechanical engineering - Experience with 12v motor speed controllers - Knowledge of industrial machinery operation - Ability to design devices for harsh outdoor environments Considering the project's specifications, an engineer with a background in designing control systems for outdoor industrial equipment will be a perfe...

I'm searching for a proficient 3D designer with experience in Fusion 360 to create a high-tech-inspired inverter roller speargun with anatomic handle. KEY REQUIREMENTS: - Create a high-quality 3D model based on the approximate dimensions I provide. - Emulate a high-tech style in the design. This should look cutting-edge and sophisticated. - Reflect wood as the primary material in the model to achieve a natural, robust and refined aesthetic. I will provide specific design guidance and feedback throughout the project to ensure it aligns with my vision. The ideal freelancer for this job has expertise in Fusion 360, 3D modeling for physical production, and an eye for high-tech design. A background in speargun design or related fields is a plus, but not required.

I require a seasoned motion graphics artist to create a product demo video. The primary objective? It's the launch of a revolutionary product - let's make an explosive entry. The imagery? Futuristic. Think along the lines of cutting-edge tech, holographic displays, sleek designs. Ideal experience and skills: - Motion graphics creation - Futuristic design aesthetic - Product demo videos and product launches - Ability to translate concepts into visually stunning animations Hit me up if you're keen on shaping the future one frame at a time.

...(except the antenna of the AIS, to be decided). The idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm • Power souce 12v • USB-C • Ethernet • CANBUS (Can provide design sources) • PCIe • SD card slot • LVDS signal + backlight (Can provide design sources) • Marine AIS class B (Can provide design sources) • Other UART inputs with optocouplers (to be decided) • GPS (Can provide design source...