Stm32 usb bootloader sourcepráce

Hledám šikulu co umí navrhovat plošný spoj. Osazení tlačítek, otočných ovladačů, komunikace s pc přes usb. Ideálně Praha / SČ / JČ

Dobrý den, pro svůj projekt, ktery je řízen procesorem STM32L432KC potřebuji napsat jednoduchý bootloader. Nemohu využít bootloader, který je standardně na čipu jelikož komunikace probíhá přes piny PB6 a PB7, kde není UART bootloader dostupný. Bohužel ostatní piny jsou plně využité. Komunikace s PC je přes FTDI chip a USB jako standardní virtual Com port. Funkce bude standardní. Po restartu bootloader čeká na příkaz a pokud nepříjde (do cca 5s) jde rovnou na aplikaci. Pokud přijde čeká na poslání dat nového FW a po uspěšném zapsaní skočí na aplikaci. Je dán komunikační proto...

Jedná se o úpravu na míru Open Source produktu Dolibarr ERP and CRM () pro potřeby střední firmy

Cílem projektu je vytvoření aplikace pro iPad Air s následující funkcionalitou. App nebude určena pro distribuci v AppStoru, ale pro provoz pouze na jednom konkrétním stroji. Aplikace by měla sledovat obsah složku fotek a zobrazovat vždy poslední pořízenou na celou obrazovku. Fotky budou do iPadu přibývat prostřednictvím eye-fi karty. Ale varianta přenosu USB kabelem z foťáku je též možná. Druhou částí aplikace by mělo být, že po ťuknutí do displaye by mělo vyskočit "okno" s tiskem a poslat fotku do tiskárny po wifi.

Popis zadání úkolu je v příloze emailu. Důležité: navrhněte jednu cenu za vytvoření daného úkolu, která bude konečná, není možné cenu dodatečně navyšovat. Uveďte i reáldou dobu dokončení projektu. Úkol: Vytvořit 2 webové stránky, která bude založená na open source řešení s vlastnostmi, které jsou popsané níže Před zadáním úkolu ve zprávě navrhněte jaké open source řešení byste pro vytvoření webové stránky použili a proč. Více v příloze

Vytvořit 5 různých webových řešení založených na open source – webové stránky, členské stránky a web pro online kurzy. Kompletní popis projektu je v příloze. Před udělením projektu navrhněte, jak byste daný projekt řešili v jakých open source platformách.

Podrobný popis úkolu je uveden v příloze. Před udělení projektu: Navrhněte, který open source redakční systém hodláte použít pro daný úkol. Vytvořit jednoduché webové stránky založené na open source redakčním systému. Stejný model formy jednoduchých webových stránek na open source redakčním systému se použije na více domén, tedy více webových stránek. – Takže úkolem je tento model open source redakční systém nahrát na webhosting/server a přiřadit k příslušné doméně – webhosting a domény již...

I'm seeking a well-experienced developer who understands STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. While not necessary I will favor developers who have the hardware at hand and can test themselves before finalizing the project. Any prior experience in Embedded development, File transfer, Network communication would be an added bonus. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and W5500 modules...

...requirements: - The logo should have a modern style, with an emphasis on sleek design. - It should incorporate a USB symbol as the main element. Ideal skills and experience: - Proven experience in modern logo design. - Ability to create a design that is both visually appealing and suitable for a car. - Understanding of gaming culture and symbolism would be a plus. This project is a great opportunity for a creative designer who is passionate about gaming and modern design. Your work will be prominently showcased on a unique car within a popular GTA server. Attached is the inspiration for the car logo. I want to remove all the words and blue back ground. I like the little face in the usb head. I also want the wire to have a little squiggle or bend in it to add depth. Thi...

I looking for someone to design a PCB to include an MCU, Wifi module, and some headers Key Requirements: - The PCB should have an STM32 microcontroller (MCU) to carry out basic functions. - The design should incorporate an ESP32 Wi-Fi module for internet connectivity and a motor controller. - The complexity of the project is minimal. Deliverable: Using EasyEDA to design the PCB, I ask to receive a copy of the project, Gerber files, BOM, Pick and Place, and any other files required to manufacture the PCB. Ideal Freelancer: - Proficient in PCB design. - Experience with integrating MCUs and Wi-Fi modules. - Able to deliver a simple, no-frills design that works effectively. Please provide me with your quotes and examples of relevant projects you have worked on.

I am looking to develop a web-based job extractor that's capable of aggregating job listing from various platforms across multiple countries with the following features: # Source Selection : The ability to select multiple sources for job scraping, including Google jobs. # Comprehensive Job Details: Extraction of all details included in the job listing, such as job title, company name, location, job description, requirements, etc. # Web Interface: A user-friendly web interface where users can enter the URL of the job listings page and initiate the scraping process. # Downloadable in .csv Format: The scraped job data should be downloadable in .csv format for easy analysis and storage. # Filtering Options: Ability to filter job listings based on old vs. new jobs for specific...

I need a skilled person to help me create a bootable USB for Windows 11. I'm on Mac and need this to be Windows 11. Please let me know how long this will take.

I am developing a system, which integrates a donchian channel along with a strategy, but has the pinescript code hidden. I need someone who can figure it out somehow.

...particularly for STM32 microcontrollers (specifically the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491...

...to two very small speakers. The sound file would be a siren with an intermittent horn. I can compose the sound file myself and load it onto the Arduino. There should be a separate potentiometer to control the sound volume. It would be nice if the battery could last an hour or so on a full charge. Once installed into the fire truck, the battery should be able to be recharged through the onboard USB port so as not to have to remove it from the fire truck. Obviously, this would all have to be very small. I have measured the width of the Arduino MKR Zero (about 1") and it should fit within the fire truck no problem. There is limited space above the board for the battery, motor and speakers. Skills and Experience Required: - Expertise in Arduino circuitry and programming. - Pas...

...connectivity options including BLE, Zigbee, and Thread. The ePaper display itself will be the Pervasive 2.13" display using the ZIF25 connector and SPI protocol. Schematics and additional reference details are attached, please read these carefully to ensure the ePaper display module functions accordingly. It will be powered by two CR2450 button cells, but please include a USB C connector for programming and backup power source. I'll also need a notification LED and a tactile button. The outcomes I'm expecting are: 1. Updated Schematic (i've attached one i've been working on for reference you can start fresh if you want though) 2. PCB design/gerber file 3. BOM spreadsheet with all components Note: I have the EXT 3-1 board and some 2.13" dis...

I want to convert an open source .exe software to APK for Android. The primary goal is to make a Morse code decoder that will effectively and accurately decode Morse code to text, and offer audio playback. Key features must include: 1. Morse Code to Text Translation: It should flawlessly translate Morse code into legible text. 2. Audio Playback: An integrated audio playback feature that allows users to listen to the decoded Morse code. 3. Replay Button: A Replay button for replaying the decoded Morse code audio. Ideal freelancers for this job should be skilled in .exe to APK conversions, Morse code decoding algorithms, and audio playback feature integration. Prior experience in developing Morse code-related apps will be a considerable advantage.

- Communicated bluetooth function on esp32 - able to connect stm32 master

Need Poker Games Source Code that was develop in unity 3D. Also looking for suggestion and more features. Will pay extra for that.

I am seeking a freelancer to help with finding 20 new product images that I specify and designing them to suit my existing products. - Be experienced in graphic design - Possess strong skills in image sourcing - Have the ability to match new designs with existing product aesthetics to the pixel Your task will primarily involve sourcing high-quality images and using these to design new products that seamlessly blend with the current lineup of electronic devices. Interested freelancers, particularly those who have previously worked with electronic devices, are encouraged to bid. Thank you.

we can do a task in different ways: I want to extract text from images with but I have a vulnerability error code which concerns , firestore and others I don't see any report but that's it for me prevents us from going further to remove these vulnerabilities? or maybe a multimodal llm (I used the most famous one and had very good results) but I would like an open source llm (I use lm studio but I am open to other suggestions) rather specialized in this task who can offer me this rare gem and/or who implemented this type of solution?

I'm in need...for integration in an existing device that is currently utilizing a ESP32-C3 Supermini Dev Board Key functionalities should include: - Bluetooth connectivity - GPIO pins configuration - ADC Input - USB-C Female Plug - Serial TX and RX IO - Ten (10) GPIO functionalities This blueprint will serve as the basis of a prototype I am developing. As such, I'm seeking to partner with someone who is experienced and proficient in the following areas: ESP32-C3FH4 development and configuration including the following features: - Bluetooth connectivity - GPIO pins configuration - ADC Input systems - USB-C connection. - Serial Comms Please ensure your proposal reflects your ability to fulfil these requirements. Also please do NOT ask to conduct business outside...

I'm seeking a programmer adept in Raspberry Pi to create a system that plays a video upon pressing a physical button. The technical specifications include: - Using a push button activating video playback - The Raspberry Pi device pulls video content from an external USB drive. Experience in handling Raspberry Pi systems and programming for hardware interaction is integral for this project. Familiarity with video playback processes would be highly advantageous.

Development of a website, with the Wordpress CMS from a figma model.

Creating a site with Wordpress from a Figma model.

...require a software solution that can extract and unlock full calibration data from a sensor for further analysis. The software must have the ability to interact with the sensor via USB connection. Key Features: - should be able to fully extract the calibration data from the sensor - the tool should be user-friendly and have a clear interface - the software should have a USB connection for the sensor - the software should be able to output the data in a readable format for further analysis Ideal Skills: - Proficiency in software development - Experience in sensor calibration and data extraction - Familiarity with USB connections and software interfacing - Strong understanding of data analysis and presentation The project will require a combination of technical and...

I'm in need of a Pinescript developer who can extract the source code of an invite-only script on TradingView. I'm looking to replicate this script for my personal use, with no need for customization. Key Requirements: - Proficiency in Pinescript and experience with TradingView scripts - Ability to extract the source code of invite-only scripts

Hi Rad R., I think I can finish your project "USB Device Detection Windows Software Registry Scrubber C++". We can discuss any details over chat.

I am in need of a proficient C++ programmer who can create a sof...am in need of a proficient C++ programmer who can create a software for Windows operating system that will effectively detect specific events when a USB device is plugged in. Registry Scrubber Key Features: - The software should monitor and identify the type of device that is connected to the USB port. - It should have capability to store this device data and send using RS-232 to an external MCU - It should also detect and monitor when a device is removed from the USB port. Skill Requirements: - Proficiency in C++ programming. - Experience in developing Windows-based applications. - Understanding of device interaction with Windows OS via USB. - Previous experience in creating device detectio...

ib gw docker build from source

I have three python codes in my raspberry pi which needs to be executed at the startup (when the pi is booted). one code involve USB camera, another codes is related to playing video via VLC media player and the third code is a counter that sends the data to a cloud. All the codes are working perfectly, they are even working when they are executed simultaneously, but the only thing is that the USB camera code is not working at the startup. If you want me to chat with you, start the bid with "pi" We have tried a lot of methods, but still no success, I believe it is because we are using raspberry pi 5, there are limited resources and libraries for it online. Please help me with this. Thank you.

I'm seeking a skilled Linux developer to assist with customizing the boot loader on my Raspberry Pi 4 and Solid Run Cube devices. The primary goal of this customization is to enable dual boot functionality. I want the system to automatically choose the platform image I wish to boot into. Ideal Skills and Experience: - Proficient in Linux system development - Experience in customizing boot loaders on Raspberry Pi - Familiarity with dual boot setup - Strong understanding of SD card behavior on Raspberry Pi - Strong problem-solving and communication skills Your role in this project would involve: - Understanding the current boot setup on my Raspberry Pi 4 - Implementing a dual boot solution with a selection screen - Ensuring seamless transition and functionality between the...

I have a xenserver with four windows virtual machines. it is installed in a DELL server with RAID. A electricity failure damage the boot and got the grub rescue console. I load ubuntu from a usb and can see the lvm partition, but can copy. So I need some one to help me to copy the virtual disk to other xenserver instalation to load the fout virtual machines.

I require a skilled 3D designer to encapsulate a small wearable device with key inclusions of a battery compartment, USB C, and Micro SIM. The purpose of the design is to accommodate an IoT device, ensuring it remains sleek and compact. The utmost importance is placed on the dimensions, so the final design must have a footprint similar to that of a smartwatch. 30 x 30 x 10 mm. Key Skills and Experience: - Proficiency in 3D design software - Prior experience with wearable devices - Understanding of IoT device encapsulation - Ability to work with compact, small-scale designs

I want an Android app for serial communication (like Hyperterminal). * Well documented source code of the app will be provided. * App will be capable of sending and receiving (i.e. full-duplex) serial data via OTG cable with RFD900A device. * The send and receive will be handled simultaneously. * Received data will be displayed on screen as text, hexcode or in binary form depending on user selectable option. * Received data will be saved into a file. User shall be able to enable or disable this option. * User will be able to define the log file name. * App will transmit data typed from a keyboard (similar to Arduino terminal) or should be able to select a file to read and transmit. * User will be able configure the serial port (i.e. select com port, baud rate (1200, 2400, 4800, 960...

I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.

Crawl, extract, build and publish all Docker Hub, , GitHub, BitBucket, GitLab, Snapcraft, Flatpak, AppImages, DC++, eMule, BitTorrent and SoulSeek as deb packages (APT repository), from ISO, container images, and source code files. Also will run a web server. More details: Is this project for business or personal use? Personal What information should successful freelancers include in their application? Detailed project proposals How soon do you need your project completed? No time limit

We are looking for a factory which is already producing something very similar to the sports medicine product we want to produce. You need to be experienced in finding suppliers and speak fluent Chinese to find suppliers that are not easy to find online. Contact me for details about the product.

I'm looking for a skilled freelancer to assist with text data entry from online sources into a database. Key Responsibilities: - Inputting data from online sources into a database - Ensuring accuracy and consistency in data entry The ideal candidate should have: - Proven experience in data entry, particularly from online sources - Strong attention to detail to ensure accuracy - Proficiency in database entry methods This is a straightforward project that needs a reliable, detail-oriented individual.

Please provide source files for employee ID badge.

...creating problems. Finally, I don’t want to have to learn how to compile the gnucobol source code and deal with dependencies, etc to make an operable package. YOU: Will create a complete “how-to” instruction package, presumably possibly writing a series of bash shell scripts that I can run from terminal as part of your project for me. I DO NOT WANT to use Docker or any other idea that will isolate what I need to do from the Ubuntu 24.04 system I am using. Ideally, you will have done the same thing on your development computer proving that a small cobol program will compile and can be run BEFORE you send your efforts to me for testing. Finally, the package results you create should be capable of being copied to a usb so that the gnucobol package can be ea...

I need a PCB designer (KiCad) for modify original design of a STM32 Nucleo64-Board(F302R8/F303RE) in order to add 2 MAX1487 on USART1 & USART3. I already have a working prototybe as a "hat" form factor for the nucleo, so the purpose of this mission is to merge our prototype schematic into the Nucleo schematic and supply a complete KiCad project ready for production (Gerger + steps to reproduce)

I'm looking for an expert skilled in C# who can help me understand the source code of a DLL file. I'm particularly interested in an in-depth understanding of its algorithms. This task will require: - Strong knowledge and expertise in C# - Experience with DLL files - Fluency in explaining intricate algorithms The main aim isn't for debugging or enhancing functionality, but purely to comprehend how it works. Looking forward to your proposals!

I have a hub dynamo installed on my bike and I'm looking for someone to wire it up to power both front and rear lights, as well as a USB charging port. I'd like the setup to be ready ASAP. Located South London. Key requirements include: - Wiring the hub dynamo to power both lights and a USB charging port - Ensuring the lights are correctly set up for front and rear - Installing the USB charging port in a convenient and accessible location It's important that the setup is both functional and durable. I'm looking for a professional who has experience working with bike dynamos and electrical systems. Experience with USB charger installations is a plus. Needs soldering experience and be able to do

...solar-powered USB module in my circuit design utilizing a SAMD51 microcontroller, I'm in need of expert assistance to address some issues with my current PCB design. I have the existing design and fab files at hand, but the project has not achieved its full functionality. - Key Issues: The circuit is experiencing power supply issues presumed to stem from the Voltage regulator, compatibility issues with the microcontroller, and an unresponsive USB output. These are the primary targets for debugging and solution creation. - Ideal Expertise: I am seeking an experienced engineer knowledgeable in PCB design, solar power modules, and the SAMD51 microcontroller. The individual must have a track record of troubleshooting and resolving power supply issues, microcontroller m...

I'm experiencing issues with my Ubuntu desktop. When I try to boot the system, I'm unable to access the desktop. I've tried several troubleshooting steps to fix the issue: - Booting from a live USB - Accessing recovery mode - Running fsck in terminal Despite these efforts, the problem remains unresolved. I can see error messages during the boot process. I am looking for an experienced Ubuntu specialist who can help me restore access to my Ubuntu desktop. The ideal candidate should have a strong background in Linux system administration and be familiar with troubleshooting boot-related issues on Ubuntu. A deep understanding of Ubuntu recovery processes and file system checks would be highly beneficial for this task.

I'm looking for a graphic designer who can recreate my company's logo. The reason for this is the original design is outdated and I would like to have the logo updated. Unfortunately, I have lost all the source files for the logo and need it to be redone. The catch is, I need the recreated logo to be an exact replica of the original. Key Points: - The logo recreation must be identical to the original logo - I don't have the source files, so the freelancer will need to create this from scratch Ideal Skills for the Job: - Proficiency in graphic design - Experience with logo recreation and restoration - Attention to detail, as the logo must be an exact match of the original - Good communication skills in order to understand and meet the project requirements.

I purchased a source code from codester for a mobile application and I'm looking for an experienced app developer to add some new features. Key modifications include: - Integrating a payment gateway into the app - Incorporating the Facebook SDK for enhanced social media functionality The ideal candidate should have: - Extensive experience in mobile app development for both iOS and Android - Previous work on integrating payment gateways and social media SDKs

I'm looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Qualifications: -must have Distortion Analyzer, freque...looking for a skilled engineer to create a CompactFlash CFast Digital Audio Player prototype. Qualifications: -must have Distortion Analyzer, frequency sweeps -be able to build a prototype board totally functional -Simulate Analog / Digital signals Regarding hardware Cflash Audio Player using AAC codec Full prototype hardware to be shipped to US Audio player will use CFast card via SATA (not USB) and play audio files using AAC codec DDDAC1794 circuit Dual Dedicated PCM clocks via TCXO 44.1 khz and 48 khz auto select MUSES IC attenuator Steel enclosure (pick something from China but big enough to support batteries) RC...

K zobrazení podrobností se zaregistrujte nebo přihlaste.